• $ 2,799.00

Turbocharger Features

  • Dual Row Ceramic Ball Bearings - lowest friction and fastest spool/response
  • Water Cooled Center Section
  • Double seals on both turbine and compressor end for extreme durability and resistance to any oil seepage
  • Boost Control Solenoid Valve Integrated to Compressor Housing
  • Integrated Speed Sensor mounting provisions
  • Low Inertia Gamma- Ti Turbine Wheel
  • Stainless Steel Turbine Housing
Kit Features

  • mountune Ni Resist turbocharger adapter
  • Preformed coolant hard lines ensure trouble free installation and performance
  • Includes ECU calibration (Cobb Accessport required) with multiple switchable slots for optional power and fuel requirements - Custom tuning is available
  • Mounting brackets to retain original heat shield
  • 6-ply reinforced silicone primary compressor intake hose assembly - Allows for maximum flow while minimizing false knock caused by metal to metal contact
  • BorgWarner Integrated recirculation valve ensures smooth OE operation and perfect drivability. Optional mountune recirculation valve can be installed
  • Turn-Key solution. No need to source additional parts or go for expensive dyno testing. This is a complete upgrade including tuning

What's included

1x mountune Ni-resist Cast Turbo Adapter Assembly

1x mountune Ultra Duty T25 Turbine Inlet Gasket

1x BorgWarner EFR-6258A Turbocharger Assembly (BorgWarner EFR-6758 optional)

1x mountune 6-Ply Compressor Inlet Hose Assembly

1x Stainless Steel Hose Clamp – SAE #52

1x Stainless Steel Hose Clamp – SAE #44

1x Turbocharger Oil Inlet Hose Assembly

1x Adapter Fitting, M12x1.5 to -4

1x Crush Washer, M12

1x Adapter Fitting, M14x1.5 to -6

1x Crush Washer, M14

1x Water Pipe #1, Block to Turbo

1x Water Pipe #2, Water Neck to Turbo

1x Tube Adapter, Turbo Oil Drain

1x Gasket, Oil Return Tube

1x mountune 5-Ply Compressor Outlet Silicone Elbow Hose

1x V-Band Clamp, EFR Exhaust Outlet

1.65’ Vacuum Hose, Silicone 4mm

2x Screw, M8 x 1.25 x 16 Socket Head

2x Nut, M6 x 1.0 Flanged Nylon Locknut

1x Stainless Steel Hose Clamp – SAE #32

1x Stainless Steel Hose Clamp – SAE #36

2x Nut, M6 x 1.0 Flanged, Serrated

2x Screw, M6 x 1.0 x 25 Socket Head

What you need

We Also Recommend