{"title":"WRX\/STI Lighting","description":"","products":[{"product_id":"trunk-light-led-for-2015-2016-subaru-wrx","title":"Trunk Light LED for 2015-2016 Subaru WRX","description":"\u003ch2\u003e\u003cem\u003eFUNCTION\u003c\/em\u003e\u003c\/h2\u003e\n\u003cp\u003eTrunk lights are used in the trunk or cargo area to illuminate the space at night. From the factory, the bulbs are incandescent, lighting up in a yellowish color.\u003c\/p\u003e\n\u003cp\u003eBy changing the factory bulb to an LED, you can illuminate the area with a much brighter light, and add a pure white, luxury look.\u003c\/p\u003e\n\u003cp\u003eThe installation is 100% plug-and-play, just replace your factory bulb.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cem\u003eBULB DESIGN\u003c\/em\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHP3:\u003c\/strong\u003e One high-power SMD under a diffusing lens for truly even output (no hotspots). Constant current design and air-cooled base for superior reliability. Features dual contact pins and nonpolar function for easy installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eHP5:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eFour high-power SMDs, under a diffusing lens. Just like the HP3, but run at higher power, with integrated copper plating for superior heat dissipation, allowing maximum brightness.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSMD12 Board: \u003c\/strong\u003eThis is an LED panel, fitted with 12 5050-size Epistar SMD chips. Comes with wedge-style adapter for direct installation. Plug the adapter into the bulb socket, then just stick the board in place with the mounting adhesive pad. This may need to be mounted to the exterior of your trunk light housing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlexLight:\u003c\/strong\u003e This is a 20-inch, low-profile LED strip, with 30 5050-size Epistar SMD chips. Comes with wedge-style adapter for direct installation. Mounts in your trunk area, flexible and waterproof, for maximum brightness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment. \u003c\/strong\u003eAll bulbs use a quality inject-molded 194\/168 T10 terminal, with a full-size base connector and proper pin alignment, designed for exact replacement of your factory 194 bulb. Just remove the old bulb, and plug in the new LED.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePLEASE NOTE: SMD12 Board\u003c\/strong\u003e is an LED board, which may mount to the exterior of your trunk light housing. \u003cstrong\u003eFlexLight\u003c\/strong\u003e is an LED strip, which plugs into your factory trunk light socket, and mounts directly into your trunk area using included adhesive strips or velcro. If you would like a direct replacement bulb, we recommend SMD5 or SMD9. We offer SMD12 Board and FlexLight for those who want to maximize brightness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in your order is ONE BULB.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cem\u003eCOLOR\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThese LEDs are available in crisp, bright colors including \u003cstrong\u003eWhite, Warm White, Blue, Red, Amber, \u003c\/strong\u003eand\u003cstrong\u003e Green.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003eWe strongly recommend \u003cstrong\u003ewhite\u003c\/strong\u003e or \u003cstrong\u003ewarm white\u003c\/strong\u003e for the best visibility.\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Cool White \/ HP3","offer_id":28525411026,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"Cool White \/ HP5","offer_id":28525411090,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"Cool White \/ SMD12","offer_id":28525411154,"sku":null,"price":14.0,"currency_code":"USD","in_stock":true},{"title":"Cool White \/ Flex Light","offer_id":28525411218,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true},{"title":"Warm White \/ HP3","offer_id":28525411282,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"Warm White \/ HP5","offer_id":28525411346,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"Warm White \/ SMD12","offer_id":28525411410,"sku":null,"price":14.0,"currency_code":"USD","in_stock":true},{"title":"Warm White \/ Flex Light","offer_id":28525411474,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true},{"title":"Blue \/ HP3","offer_id":28525411538,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"Blue \/ HP5","offer_id":28525411602,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"Blue \/ SMD12","offer_id":28525411730,"sku":null,"price":14.0,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Flex Light","offer_id":28525411794,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true},{"title":"Green \/ HP3","offer_id":28525411858,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"Green \/ HP5","offer_id":28525411922,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"Green \/ SMD12","offer_id":28525411986,"sku":null,"price":14.0,"currency_code":"USD","in_stock":true},{"title":"Green \/ Flex Light","offer_id":28525412050,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true},{"title":"Red \/ HP3","offer_id":28525412114,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"Red \/ HP5","offer_id":28525412178,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"Red \/ SMD12","offer_id":28525412242,"sku":null,"price":14.0,"currency_code":"USD","in_stock":true},{"title":"Red \/ Flex Light","offer_id":28525412306,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true},{"title":"Amber \/ HP3","offer_id":28525412370,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"Amber \/ HP5","offer_id":28525412434,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"Amber \/ SMD12","offer_id":28525412498,"sku":null,"price":14.0,"currency_code":"USD","in_stock":true},{"title":"Amber \/ Flex Light","offer_id":28525412562,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/diode-dynamics-trunk-light-led-for-2015-2016-subaru-wrx-panda-motorworks-6449757.jpg?v=1770922212"},{"product_id":"dome-light-led-for-2011-2014-subaru-wrx","title":"Dome Light LED for 2011-2014 Subaru WRX","description":"\u003ch2\u003e\u003cem\u003eFUNCTION\u003c\/em\u003e\u003c\/h2\u003e\n\u003cp\u003eYour dome light, or single light located in the center of the ceiling, uses an incandescent bulb from the factory, giving it a yellowish color. By replacing with an LED, you can add a luxurious and modern look to your vehicle, with a cool white color, just like the lights on newer luxury vehicles. You can also increase the brightness with SMF6 or SMD12 Board, to improve the performance of your dome light.\u003c\/p\u003e\n\u003cp\u003eThe installation is 100% plug-and-play, just replace your factory bulb!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cem\u003eBULB DESIGN\u003c\/em\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSMF2:\u003c\/strong\u003e This bulb has a standard festoon base, with two 5050-size Epistar SMDs and a protective cover for added durability and style. Direct replacement, plug and play.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSMF6: \u003c\/strong\u003eStandard festoon base, with six 5050-size Epistar SMD chips arranged on a rectangular panel. Direct replacement, plug and play.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSMD12 Board: \u003c\/strong\u003eThis is an LED panel, fitted with 12 5050-size Epistar SMD chips. Comes with spring-loaded festoon-style adapter for direct installation. Plug the adapter into the bulb socket, then just stick the board in place with the mounting adhesive pad. The board-and-adapter design allows for extremely high brightness compared to a simple bulb.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in your order is ONE BULB.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cem\u003eCOLOR\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThese LEDs are available in many crisp, bright colors. \u003cstrong\u003eWhite \u003c\/strong\u003eand\u003cstrong\u003e warm white\u003c\/strong\u003e are the most popular colors, for a modern look with maximum visible light.\u003c\/p\u003e\n\u003cp\u003eYou can also select \u003cstrong\u003eblue, red, green, or amber\u003c\/strong\u003e to add a unique look to your interior. Please note- when ordering these unique colors, we recommend moving to the next-brighter stage for acceptable light output.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cem\u003eBRIGHTNESS\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eDiode Dynamics offers several brightness options so you can choose what fits you best.  These options are listed by the design and the lumen output of each bulb: \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSMF2:\u003c\/strong\u003e Slightly lower brightness than OEM bulbs, but still provides the crisp, modern color of LED.\u003cbr\u003e\u003cstrong\u003eSMF6:\u003c\/strong\u003e Slightly higher brightness than OEM bulbs.\u003cbr\u003e\u003cstrong\u003eSMD12 Board:\u003c\/strong\u003e Much brighter than OEM bulbs. These are bright!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLumens: BUYER BEWARE!\u003c\/strong\u003e Most sellers just provide \"calculated\" lumen numbers, based on the maximum potential brightness of the LED chips on the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is not accurate, as the design of an LED bulb does not get rid of heat fast enough to run the LEDs at maximum.\u003c\/p\u003e\n\u003cp\u003eThese \"calculated\" lumen ratings are much, much higher than the true, measured light output, so it will look like competitors' bulbs are brighter than ours. This is because Diode Dynamics does not provide inflated \"calculated\" numbers; we believe it is misleading. We test the actual brightness of the bulbs in our lab, to provide real lumen output measurements. Our measurements are accurate, but they are usually much lower than the misleading \"calculated\" figures. Please \u003ca href=\"http:\/\/www.diodedynamics.com\/store\/research\/research-led\/led-brightness.html\" target=\"_blank\"\u003eclick here\u003c\/a\u003e to learn more about LED brightness measurement.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cem\u003eQUALITY\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eLED Components.\u003c\/strong\u003e Diode Dynamics uses only the highest quality LED chips in the production of its bulbs. This means we use only brand-name suppliers such as Epistar, Cree, Osram, and Samsung.\u003c\/p\u003e\n\u003cp\u003eWhile Diode Dynamics bulbs may look the same as others on the market, most copycat bulbs use economy-grade LED chips in order to reduce costs. This greatly reduces the reliability and overall brightness of the bulb when you compare it to Diode Dynamics.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction.\u003c\/strong\u003e Although LED technology allows for extremely long bulb life, the market is flooded with cheap LED bulbs that fail prematurely due to inferior construction. The worst enemy of LEDs is excessive heat, and when bulbs are not designed properly, they do not disperse heat as well, leading to premature failure.\u003c\/p\u003e\n\u003cp\u003eOff-brand, cheap bulbs exhibit poor solder uniformity, high levels of flux in the solder, uneven chip placement, low-gauge terminal wires, poor assembly, and bulbs held together with inferior adhesives. At best, solder joints will crack and fail on low-quality LEDs after a few weeks of use. In the worst case, these bulbs can damage housings as the extra flux and adhesive evaporates and creates a residue on the lens of the housing.\u003c\/p\u003e\n\u003cp\u003eDiode Dynamics bulbs are produced with modern, computerized equipment, and only the best materials, to ensure complete uniformity, high quality, and long bulb life.\u003c\/p\u003e\n\u003cp\u003eAll Diode Dynamics products come with a 30-day satisfaction guarantee and a 3-year limited replacement warranty. For more information, please view the \u003ca title=\"Warranty Information\" href=\"http:\/\/www.diodedynamics.com\/store\/warranty-info\" target=\"_blank\"\u003eWarranty Information\u003c\/a\u003e page.\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Cool White \/ SMF2","offer_id":28525417682,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true},{"title":"Cool White \/ SMF6","offer_id":28525417746,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true},{"title":"Cool White \/ SMD12","offer_id":28525417810,"sku":null,"price":14.0,"currency_code":"USD","in_stock":true},{"title":"Warm White \/ SMF2","offer_id":28525417874,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true},{"title":"Warm White \/ SMF6","offer_id":28525417938,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true},{"title":"Warm White \/ SMD12","offer_id":28525418002,"sku":null,"price":14.0,"currency_code":"USD","in_stock":true},{"title":"Blue \/ SMF2","offer_id":28525418066,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true},{"title":"Blue \/ SMF6","offer_id":28525418130,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true},{"title":"Blue \/ SMD12","offer_id":28525418194,"sku":null,"price":14.0,"currency_code":"USD","in_stock":true},{"title":"Green \/ SMF2","offer_id":28525418258,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true},{"title":"Green \/ SMF6","offer_id":28525418322,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true},{"title":"Green \/ SMD12","offer_id":28525418386,"sku":null,"price":14.0,"currency_code":"USD","in_stock":true},{"title":"Red \/ SMF2","offer_id":28525418450,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true},{"title":"Red \/ SMF6","offer_id":28525418514,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true},{"title":"Red \/ SMD12","offer_id":28525418578,"sku":null,"price":14.0,"currency_code":"USD","in_stock":true},{"title":"Amber \/ SMF2","offer_id":28525418642,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true},{"title":"Amber \/ SMF6","offer_id":28525418706,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true},{"title":"Amber \/ SMD12","offer_id":28525418770,"sku":null,"price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/diode-dynamics-dome-light-led-for-2011-2014-subaru-wrx-panda-motorworks-5168576.jpg?v=1770922211"},{"product_id":"vanity-light-leds-for-2015-2016-subaru-wrx-pair","title":"Vanity Light LEDs for 2015-2016 Subaru WRX (pair)","description":"\u003ch2\u003e\u003cem\u003eFUNCTION\u003c\/em\u003e\u003c\/h2\u003e\n\u003cp\u003eVanity lights, or the lights which illuminate the vanity mirror on your vehicle under the sun visor, use incandescent bulbs from the factory, giving them a yellowish color. By replacing these factory bulbs with LEDs, you can add a luxurious and modern look to your vehicle, with a cool white color, just like newer luxury vehicles. Sometimes a warm color is still desired with the mirror, in which case you can still upgrade brightness while using warm white LEDs.\u003c\/p\u003e\n\u003cp\u003eThe installation is 100% plug-and-play, just replace your factory bulb!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cem\u003eBULB DESIGN\u003c\/em\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSMF1:\u003c\/strong\u003e This bulb has a standard 28mm fuse-style base, with a single 5050-size Epistar SMD. Direct replacement, plug and play.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSMF2:\u003c\/strong\u003e Standard 28mm fuse-style base, with two 5050-size Epistar SMDs. Direct replacement, plug and play.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in your order is TWO BULBS.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cem\u003eCOLOR\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThese LEDs are available in many crisp, bright colors. \u003cstrong\u003eWhite \u003c\/strong\u003eand\u003cstrong\u003e warm white\u003c\/strong\u003e are the most popular colors, for a modern look with maximum visible light.\u003c\/p\u003e\n\u003cp\u003eYou can also select \u003cstrong\u003eblue, red, green, or amber\u003c\/strong\u003e to add a unique look to your interior. Please note- when ordering these unique colors, we recommend moving to the next-brighter stage for acceptable light output.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cem\u003eBRIGHTNESS\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eDiode Dynamics offers several brightness options so you can choose what fits you best.  These options are listed by the design and the lumen output of each bulb:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSMF1:\u003c\/strong\u003e Slightly lower brightness than OEM bulbs, but still provides the crisp, modern color of LED.\u003cbr\u003e\u003cstrong\u003eSMF2:\u003c\/strong\u003e Slightly higher brightness than OEM bulbs.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLumens: BUYER BEWARE!\u003c\/strong\u003e Most sellers just provide \"calculated\" lumen numbers, based on the maximum potential brightness of the LED chips on the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is not accurate, as the design of an LED bulb does not get rid of heat fast enough to run the LEDs at maximum.\u003c\/p\u003e\n\u003cp\u003eThese \"calculated\" lumen ratings are much, much higher than the true, measured light output, so it will look like competitors' bulbs are brighter than ours. This is because Diode Dynamics does not provide inflated \"calculated\" numbers; we believe it is misleading. We test the actual brightness of the bulbs in our lab, to provide real lumen output measurements. Our measurements are accurate, but they are usually much lower than the misleading \"calculated\" figures. Please \u003ca href=\"http:\/\/www.diodedynamics.com\/store\/research\/research-led\/led-brightness.html\" target=\"_blank\"\u003eclick here\u003c\/a\u003e to learn more about LED brightness measurement.\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Cool White \/ SMF1","offer_id":28525426962,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"Cool White \/ SMF2","offer_id":28525427026,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"Warm White \/ SMF1","offer_id":28525427090,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"Warm White \/ SMF2","offer_id":28525427154,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"Blue \/ SMF1","offer_id":28525427218,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"Blue \/ SMF2","offer_id":28525427282,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"Green \/ SMF1","offer_id":28525427346,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"Green \/ SMF2","offer_id":28525427410,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"Red \/ SMF1","offer_id":28525427474,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"Red \/ SMF2","offer_id":28525427538,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"Amber \/ SMF1","offer_id":28525427602,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"Amber \/ SMF2","offer_id":28525427666,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/diode-dynamics-vanity-light-leds-for-2015-2016-subaru-wrx-pair-panda-motorworks-3958282.jpg?v=1770922211"},{"product_id":"license-plate-leds-for-2004-2016-subaru-wrx-pair","title":"License Plate LEDs for 2004-2016 Subaru WRX (pair)","description":"\u003ch2\u003e\u003cem\u003eFUNCTION\u003c\/em\u003e\u003c\/h2\u003e\n\u003cp\u003eLicense plate bulbs are used to illuminate the rear license plate on your vehicle. From the factory, the bulbs are incandescent, lighting up in a yellowish color.\u003c\/p\u003e\n\u003cp\u003eNewer luxury cars use LED modules to illuminate the license plate with modern, cool white light. By changing your license plate bulbs to LED, you can easily add this luxury look to your vehicle! \u003c\/p\u003e\n\u003cp\u003eThe installation is 100% plug-and-play, just replace your factory bulb.\u003c\/p\u003e\n\u003cp\u003e With low price and easy install, this is one of the best, easiest modifications you can do to improve how your car looks at night.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cem\u003eBULB DESIGN\u003c\/em\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSMD2: \u003c\/strong\u003eSimilarly compact design, with two 5050-size Epistar SMD chips, driven at high power for maximum effective brightness. Outputs at 180 degrees.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eHP3:\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e One high-power SMD under a diffusing lens for truly even output (no hotspots). Constant current design and air-cooled base for superior reliability. Features dual contact pins and nonpolar function for easy installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHP5:\u003c\/strong\u003e Four high-power SMDs, under a diffusing lens. Just like the HP3, but run at higher power, with integrated copper plating for superior heat dissipation, allowing maximum brightness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment. \u003c\/strong\u003eAll bulbs use a quality inject-molded 194\/168 T10 terminal, with a full-size base connector and proper pin alignment, designed for exact replacement of your factory 194 bulb. Just remove the old bulb, and plug in the new LED.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in your order is TWO BULBS.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cem\u003eCOLOR\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThese LEDs are available in crisp, bright colors including \u003cstrong\u003eWhite, Warm White, Blue, Red, Amber, \u003c\/strong\u003eand\u003cstrong\u003e Green.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cspan\u003eWe strongly recommend \u003cstrong\u003ewhite\u003c\/strong\u003e or \u003cstrong\u003ewarm white\u003c\/strong\u003e for license plate applications\u003c\/span\u003e- the other colors are illegal in most areas. Please check your local laws before ordering.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cem\u003eBRIGHTNESS\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eDiode Dynamics offers several brightness options so you can choose what fits you best.  These options are listed by the design and the lumen output of each bulb:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSMD2:\u003c\/strong\u003e Slightly higher brightness than OEM bulbs.\u003cbr\u003e\u003cstrong\u003eHP3:\u003c\/strong\u003e Much brighter than OEM bulbs. These are bright!\u003cbr\u003e\u003cstrong\u003eHP5:\u003c\/strong\u003e Nearly triple the brightness of stock OEM bulbs!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLumens: BUYER BEWARE!\u003c\/strong\u003e Most sellers just provide \"calculated\" lumen numbers, based on the maximum potential brightness of the LED chips on the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is not accurate, as the design of an LED bulb does not get rid of heat fast enough to run the LEDs at maximum.\u003c\/p\u003e\n\u003cp\u003eThese \"calculated\" lumen ratings are much, much higher than the true, measured light output, so it will look like competitors' bulbs are brighter than ours. This is because Diode Dynamics does not provide inflated \"calculated\" numbers; we believe it is misleading. We test the actual brightness of the bulbs in our lab, to provide real lumen output measurements. Our measurements are accurate, but they are usually much lower than the misleading \"calculated\" figures. Please \u003ca href=\"http:\/\/www.diodedynamics.com\/store\/research\/research-led\/led-brightness.html\" target=\"_blank\"\u003eclick here\u003c\/a\u003e to learn more about LED brightness measurement.\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Cool White \/ SMD2","offer_id":28525442450,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true},{"title":"Cool White \/ HP3","offer_id":28525442514,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true},{"title":"Cool White \/ HP5","offer_id":28525442578,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true},{"title":"Warm White \/ SMD2","offer_id":28525442642,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true},{"title":"Warm White \/ HP3","offer_id":28525442706,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true},{"title":"Warm White \/ HP5","offer_id":28525442770,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true},{"title":"Red \/ SMD2","offer_id":28525442834,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true},{"title":"Red \/ HP3","offer_id":28525442898,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true},{"title":"Red \/ HP5","offer_id":28525442962,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true},{"title":"Green \/ SMD2","offer_id":28525443026,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true},{"title":"Green \/ HP3","offer_id":28525443090,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true},{"title":"Green \/ HP5","offer_id":28525443154,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true},{"title":"Blue \/ SMD2","offer_id":28525443218,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true},{"title":"Blue \/ HP3","offer_id":28525443282,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true},{"title":"Blue \/ HP5","offer_id":28525443346,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true},{"title":"Amber \/ SMD2","offer_id":28525443410,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true},{"title":"Amber \/ HP3","offer_id":28525443474,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true},{"title":"Amber \/ HP5","offer_id":28525443538,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/diode-dynamics-license-plate-leds-for-2004-2016-subaru-wrx-pair-panda-motorworks-8621757.jpg?v=1770922211"},{"product_id":"trunk-light-led-for-2008-2013-subaru-wrx-sti","title":"Trunk Light LED for 2008-2013 Subaru WRX STi","description":"\u003ch2\u003e\u003cem\u003eFUNCTION\u003c\/em\u003e\u003c\/h2\u003e\n\u003cp\u003eTrunk lights are used in the trunk or cargo area to illuminate the space at night. From the factory, the bulbs are incandescant, lighting up in a yellowish color.\u003c\/p\u003e\n\u003cp\u003eBy changing the factory bulb to an LED, you can illuminate the area with a much brighter light, and add a pure white, luxury look.\u003c\/p\u003e\n\u003cp\u003eThe installation is 100% plug-and-play, just replace your factory bulb.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cem\u003eBULB DESIGN\u003c\/em\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSMD12 Board: \u003c\/strong\u003eAlso an LED panel, with 12 SMD chips. Due to the increased size, this may need to be mounted to the exterior of the trunk light housing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlexLight:\u003c\/strong\u003e This is a 20-inch, low-profile LED strip, with 30 5050-size Epistar SMD chips, with adapters for universal installation. Mounts in your trunk area, flexible and waterproof, for maximum brightness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePLEASE NOTE: SMD12 Board\u003c\/strong\u003e is an LED board, which may mount to the exterior of your trunk light housing. \u003cstrong\u003eFlexLight\u003c\/strong\u003e is an LED strip, which plugs into your factory trunk light socket, and mounts directly into your trunk area using included adhesive strips or velcro. We offer the Boards and FlexLight for those who want to maximize brightness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in your order is ONE BULB.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cem\u003eCOLOR\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThese LEDs are available in crisp, bright colors including \u003cstrong\u003eWhite, Warm White, Blue, Red, Amber, \u003c\/strong\u003eand\u003cstrong\u003e Green.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003eWe strongly recommend \u003cstrong\u003ewhite\u003c\/strong\u003e or \u003cstrong\u003ewarm white\u003c\/strong\u003e for the best visibility.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cem\u003eBRIGHTNESS\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eDiode Dynamics offers several brightness options so you can choose what fits you best.  These options are listed by the design and the lumen output of each bulb:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSMD12 Board:\u003c\/strong\u003e Much brighter than OEM bulbs. These are bright!\u003cbr\u003e\u003cstrong\u003eFlexLight:\u003c\/strong\u003e Extremely bright compared to OEM bulb.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLumens: BUYER BEWARE!\u003c\/strong\u003e Most sellers just provide \"calculated\" lumen numbers, based on the maximum potential brightness of the LED chips on the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is not accurate, as the design of an LED bulb does not get rid of heat fast enough to run the LEDs at maximum.\u003c\/p\u003e\n\u003cp\u003eThese \"calculated\" lumen ratings are much, much higher than the true, measured light output, so it will look like competitors' bulbs are brighter than ours. This is because Diode Dynamics does not provide inflated \"calculated\" numbers; we believe it is misleading. We test the actual brightness of the bulbs in our lab, to provide real lumen output measurements. Our measurements are accurate, but they are usually much lower than the misleading \"calculated\" figures. Please \u003ca href=\"http:\/\/www.diodedynamics.com\/store\/research\/research-led\/led-brightness.html\" target=\"_blank\"\u003eclick here\u003c\/a\u003e to learn more about LED brightness measurement.\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Cool White \/ SMD6","offer_id":28525453586,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true},{"title":"Cool White \/ SMD12","offer_id":28525453650,"sku":null,"price":14.0,"currency_code":"USD","in_stock":true},{"title":"Cool White \/ Flex Light","offer_id":28525453714,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true},{"title":"Warm White \/ SMD6","offer_id":28525453778,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true},{"title":"Warm White \/ SMD12","offer_id":28525453842,"sku":null,"price":14.0,"currency_code":"USD","in_stock":true},{"title":"Warm White \/ Flex Light","offer_id":28525453906,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true},{"title":"Blue \/ SMD6","offer_id":28525453970,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true},{"title":"Blue \/ SMD12","offer_id":28525454034,"sku":null,"price":14.0,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Flex Light","offer_id":28525454098,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true},{"title":"Green \/ SMD6","offer_id":28525454162,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true},{"title":"Green \/ SMD12","offer_id":28525454226,"sku":null,"price":14.0,"currency_code":"USD","in_stock":true},{"title":"Green \/ Flex Light","offer_id":28525454290,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true},{"title":"Red \/ SMD6","offer_id":28525454354,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true},{"title":"Red \/ SMD12","offer_id":28525454418,"sku":null,"price":14.0,"currency_code":"USD","in_stock":true},{"title":"Red \/ Flex Light","offer_id":28525454482,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true},{"title":"Amber \/ SMD6","offer_id":28525454546,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true},{"title":"Amber \/ SMD12","offer_id":28525454610,"sku":null,"price":14.0,"currency_code":"USD","in_stock":true},{"title":"Amber \/ Flex Light","offer_id":28525454674,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/diode-dynamics-trunk-light-led-for-2008-2013-subaru-wrx-sti-panda-motorworks-6139994.jpg?v=1770922211"},{"product_id":"map-light-leds-for-2011-2014-subaru-wrx-pair","title":"Map Light LEDs for 2011-2014 Subaru WRX (pair)","description":"\u003ch2\u003e\u003cem\u003eFUNCTION\u003c\/em\u003e\u003c\/h2\u003e\n\u003cp\u003eMap lights, or the pair of lights above your front seats, use incandescent bulbs from the factory, giving them a yellowish color. By replacing these factory bulbs with LEDs, you can add a luxurious and modern look to your vehicle, with a cool white color, just like the map lights on newer luxury vehicles. You can also increase the brightness with SMF2 or SMF6 bulbs, to improve the performance of your map lights.\u003c\/p\u003e\n\u003cp\u003eThe installation is 100% plug-and-play, just replace your factory bulb!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cem\u003eBULB DESIGN\u003c\/em\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSMF2:\u003c\/strong\u003e This bulb has a standard festoon base, with two 5050-size Epistar SMDs and a protective cover for added durability and style. Direct replacement, plug and play.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSMF6: \u003c\/strong\u003eStandard festoon base, with six 5050-size Epistar SMD chips arranged on a rectangular panel. Direct replacement, plug and play.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSMD12 Board: \u003c\/strong\u003eThis is an LED panel, fitted with 12 5050-size Epistar SMD chips. Comes with spring-loaded festoon-style adapter for direct installation. Plug the adapter into the bulb socket, then just stick the board in place with the mounting adhesive pad. The board-and-adapter design allows for extremely high brightness compared to a simple bulb.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in your order is TWO BULBS.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cem\u003eCOLOR\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThese LEDs are available in many crisp, bright colors. \u003cstrong\u003eWhite \u003c\/strong\u003eand\u003cstrong\u003e warm white\u003c\/strong\u003e are the most popular colors, for a modern look with maximum visible light.\u003c\/p\u003e\n\u003cp\u003eYou can also select \u003cstrong\u003eblue, red, green, or amber\u003c\/strong\u003e to add a unique look to your interior. Please note- when ordering these unique colors, we recommend moving to the next-brighter stage for acceptable light output.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cem\u003eBRIGHTNESS\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eDiode Dynamics offers several brightness options so you can choose what fits you best.  These options are listed by the design and the lumen output of each bulb:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSMF2:\u003c\/strong\u003e Slightly lower brightness than OEM bulbs, but still provides the crisp, modern color of LED.\u003cbr\u003e\u003cstrong\u003eSMF6:\u003c\/strong\u003e Slightly higher brightness than OEM bulbs.\u003cbr\u003e\u003cstrong\u003eSMD12 Board:\u003c\/strong\u003e Much brighter than OEM bulbs. These are bright!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLumens: BUYER BEWARE!\u003c\/strong\u003e Most sellers just provide \"calculated\" lumen numbers, based on the maximum potential brightness of the LED chips on the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is not accurate, as the design of an LED bulb does not get rid of heat fast enough to run the LEDs at maximum.\u003c\/p\u003e\n\u003cp\u003eThese \"calculated\" lumen ratings are much, much higher than the true, measured light output, so it will look like competitors' bulbs are brighter than ours. This is because Diode Dynamics does not provide inflated \"calculated\" numbers; we believe it is misleading. We test the actual brightness of the bulbs in our lab, to provide real lumen output measurements. Our measurements are accurate, but they are usually much lower than the misleading \"calculated\" figures. Please \u003ca href=\"http:\/\/www.diodedynamics.com\/store\/research\/research-led\/led-brightness.html\" target=\"_blank\"\u003eclick here\u003c\/a\u003e to learn more about LED brightness measurement.\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Cool White \/ SMF2","offer_id":28525465298,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"Cool White \/ SMF6","offer_id":28525465362,"sku":null,"price":16.0,"currency_code":"USD","in_stock":true},{"title":"Warm White \/ SMF2","offer_id":28525465426,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"Warm White \/ SMF6","offer_id":28525465490,"sku":null,"price":16.0,"currency_code":"USD","in_stock":true},{"title":"Green \/ SMF2","offer_id":28525465554,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"Green \/ SMF6","offer_id":28525465618,"sku":null,"price":16.0,"currency_code":"USD","in_stock":true},{"title":"Blue \/ SMF2","offer_id":28525465682,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"Blue \/ SMF6","offer_id":28525465746,"sku":null,"price":16.0,"currency_code":"USD","in_stock":true},{"title":"Amber \/ SMF2","offer_id":28525465810,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"Amber \/ SMF6","offer_id":28525465874,"sku":null,"price":16.0,"currency_code":"USD","in_stock":true},{"title":"Red \/ SMF2","offer_id":28525465938,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"Red \/ SMF6","offer_id":28525466002,"sku":null,"price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/diode-dynamics-map-light-leds-for-2011-2014-subaru-wrx-pair-panda-motorworks-5868177.jpg?v=1770922211"},{"product_id":"led-turn-signal-flasher-for-2015-2016-subaru-wrx","title":"LED Turn Signal Flasher for 2015-2016 Subaru WRX","description":"\u003cp\u003eThis is a replacement turn signal flasher module. It will eliminate fast turn signal blinking, known as hyperblinking, that occurs when you replace your turn signal bulbs with LEDs. It has been designed specifically for use with LEDs.\u003c\/p\u003e\n\u003cp\u003eThis module is specifically for your vehicle! It will be 100% plug and play. Just remove the factory flasher, and plug this one in.\u003c\/p\u003e\n\u003ch2\u003eHyperblinking\u003c\/h2\u003e\n\u003cp\u003eWhy do you need this module? When your factory turn signal bulbs go out, your vehicle's flasher senses that less power is being used, and it will blink the turn signals quickly to alert you. When LED turn signal bulbs are installed, it lowers the load on the circuit too, because LEDs use less power. You get the fast blinking, known as \"hyperblinking,\" even though the LEDs are functioning just fine. Basically, your car thinks the bulbs went out!\u003c\/p\u003e\n\u003cp\u003eTo slow down the blinking to regular speed, you can add resistors to increase the circuit's power consumption again. However, whenever possible, replacing the flasher with a module like this is the easiest option. This is the unit that actually controls the blinking speed, and makes the \"clicking\" noise.\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":28525470802,"sku":"DD4015","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/diode-dynamics-led-turn-signal-flasher-for-2015-2016-subaru-wrx-dd4015-panda-motorworks-1481715.jpg?v=1770922211"},{"product_id":"led-turn-signal-flasher-for-2008-2014-subaru-wrx","title":"LED Turn Signal Flasher for 2008-2014 Subaru WRX","description":"\u003cp\u003eThis is a replacement turn signal flasher module. It will eliminate fast turn signal blinking, known as hyperblinking, that occurs when you replace your turn signal bulbs with LEDs. It has been designed specifically for use with LEDs.\u003c\/p\u003e\n\u003cp\u003eThis module is specifically for your vehicle! It will be 100% plug and play. Just remove the factory flasher, and plug this one in.\u003c\/p\u003e\n\u003ch2\u003eHyperblinking\u003c\/h2\u003e\n\u003cp\u003eWhy do you need this module? When your factory turn signal bulbs go out, your vehicle's flasher senses that less power is being used, and it will blink the turn signals quickly to alert you. When LED turn signal bulbs are installed, it lowers the load on the circuit too, because LEDs use less power. You get the fast blinking, known as \"hyperblinking,\" even though the LEDs are functioning just fine. Basically, your car thinks the bulbs went out!\u003c\/p\u003e\n\u003cp\u003eTo slow down the blinking to regular speed, you can add resistors to increase the circuit's power consumption again. However, whenever possible, replacing the flasher with a module like this is the easiest option. This is the unit that actually controls the blinking speed, and makes the \"clicking\" noise.\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":28525475474,"sku":null,"price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/diode-dynamics-led-turn-signal-flasher-for-2008-2014-subaru-wrx-panda-motorworks-1621814.jpg?v=1770922211"},{"product_id":"backup-leds-for-2015-2016-subaru-wrx-pair","title":"Backup LEDs for 2015-2016 Subaru WRX (pair)","description":"\u003cp\u003eNotice: This bulb (921) is for the WRX Sedan. The WRX Wagon uses a 7440.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cem\u003eBULB DESIGN\u003c\/em\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eHP5:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eFour high-power SMDs, under a diffusing lens. Just like the HP3, but run at higher power, with integrated copper plating for superior heat dissipation, allowing maximum brightness.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHP36: \u003c\/strong\u003eFull 360 degree illumination with 36 High-Power Samsung LEDs. Aluminum base for optimum heatsinking, and non-polar design for easy installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXP50:\u003c\/strong\u003e Each of the four sides of this bulb contains two 5W-rated chips, and the top is fitted with two more under a projector lens. Housed in an aluminum casing with textured finish for maximum heatsinking properties.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment. \u003c\/strong\u003eAll three bulbs use a quality inject-molded 921 terminal, with a sturdy base connector and proper pin alignment, designed for exact replacement of your factory 921 bulb. \u003cspan\u003eYou will not need resistors for backup lights.\u003c\/span\u003e Just replace the factory bulb.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in your order is TWO BULBS.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cem\u003eCOLOR\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThese LEDs illuminate in a crisp, cool, bright, \u003cstrong\u003ewhite\u003c\/strong\u003e hue for maximum light output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cem\u003eBRIGHTNESS\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eDiode Dynamics offers several brightness options so you can choose what fits you best.  These options are listed by the design and the lumen output of each bulb: \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHP5:\u003c\/strong\u003e Slightly lower brightness than OEM bulbs, but still provides the crisp, modern instant on\/off of LED technology.\u003cbr\u003e\u003cstrong\u003eHP36:\u003c\/strong\u003e Slightly higher brightness than OEM bulbs.\u003cbr\u003e\u003cstrong\u003eXP50:\u003c\/strong\u003e Much brighter than OEM bulbs. These are bright!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLumens.\u003c\/strong\u003e \u003cstrong\u003eBUYER BEWARE!\u003c\/strong\u003e\u003cspan\u003e Most sellers just provide \"calculated\" lumen numbers, based on the maximum potential brightness of the LED chips on the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is not accurate, as the design of an LED bulb does not get rid of heat fast enough to run the LEDs at maximum.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese \"calculated\" lumen ratings are much, much higher than the true, measured light output, so it will look like competitors' bulbs are brighter than ours. This is because Diode Dynamics does not provide inflated \"calculated\" numbers; we believe it is misleading. We test the actual brightness of the bulbs in our lab, to provide real lumen output measurements. Our measurements are accurate, but they are usually much lower than the misleading \"calculated\" figures. Please \u003ca href=\"http:\/\/www.diodedynamics.com\/store\/research\/research-led\/led-brightness.html\" target=\"_blank\"\u003eclick here\u003c\/a\u003e to learn more about LED brightness measurement.\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"HP5","offer_id":28525487250,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true},{"title":"HP36","offer_id":28525487314,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true},{"title":"XP50","offer_id":28525487378,"sku":null,"price":90.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/diode-dynamics-backup-leds-for-2015-2016-subaru-wrx-pair-panda-motorworks-9865691.jpg?v=1770922211"},{"product_id":"interior-led-conversion-kit-for-2015-2016-subaru-wrx-sti","title":"Interior LED Conversion Kit for 2015-2016 Subaru WRX STi","description":"\u003cp\u003eThis interior LED conversion kit in the color of your choice includes:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStage 1 Kit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2-31mm SMF2 Map Light LED Bulbs\u003cbr\u003e1-31mm SMF2 Dome Light LED Bulb\u003cbr\u003e1-194 HP3 Trunk Light LED Bulb\u003cbr\u003e2-194 HP3 License Plate LED Bulbs\u003cbr\u003e2-28mm SMF1 Vanity Light LED Bulbs\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStage 2 Kit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2-31mm SMF6 Map Light LED Bulbs\u003cbr\u003e1-31mm SMF6 Dome Light LED Bulb\u003cbr\u003e1-194 HP5 Trunk Light LED Bulb\u003cbr\u003e2-194 HP5 License Plate LED Bulbs\u003cbr\u003e2-28mm SMF2 Vanity Light LED Bulbs\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Cool White \/ Stage 1","offer_id":28525500050,"sku":null,"price":39.0,"currency_code":"USD","in_stock":true},{"title":"Cool White \/ Stage 2","offer_id":28525500114,"sku":null,"price":64.0,"currency_code":"USD","in_stock":true},{"title":"Red \/ Stage 1","offer_id":28525500242,"sku":null,"price":39.0,"currency_code":"USD","in_stock":true},{"title":"Red \/ Stage 2","offer_id":28525500306,"sku":null,"price":64.0,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Stage 1","offer_id":28525500370,"sku":null,"price":39.0,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Stage 2","offer_id":28525500434,"sku":null,"price":64.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/diode-dynamics-interior-led-conversion-kit-for-2015-2016-subaru-wrx-sti-panda-motorworks-4087881.jpg?v=1770922210"},{"product_id":"rear-turn-signal-leds-for-2004-2016-subaru-wrx-pair","title":"Rear Turn Signal LEDs for 2004-2016 Subaru WRX (pair)","description":"\u003cform method=\"post\" id=\"product_addtocart_form\" enctype=\"multipart\/form-data\" action=\"http:\/\/www.diodedynamics.com\/store\/checkout\/cart\/add\/uenc\/aHR0cDovL3d3dy5kaW9kZWR5bmFtaWNzLmNvbS9zdG9yZS9sZWQtYnVsYnMvbGlzdGVkLWJ5LXZlaGljbGUvc3ViYXJ1L3dyeC8yMDA4LTIwMTMtc3ViYXJ1LXdyeC1yZWFyLXR1cm4tc2lnbmFsLWxlZHMtcGFpcg,,\/product\/16582\/\"\u003e\n\u003cdiv class=\"product-shop\"\u003e\n\u003cdiv class=\"product-options\" id=\"product-options-wrapper\"\u003e\n\u003cdl\u003e\n\u003cdd class=\"last\"\u003e\n\u003cdiv class=\"input-box\"\u003e\u003c\/div\u003e\n\u003c\/dd\u003e\n\u003c\/dl\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/form\u003e\n\u003cdiv class=\"product-collateral\"\u003e\n\u003cul class=\"tabs\"\u003e\u003c\/ul\u003e\n\u003cdiv class=\"padder\"\u003e\n\u003cdiv id=\"product_tabs_description_tabbed_contents\"\u003e\n\u003cdiv class=\"std\"\u003e\n\u003ch2\u003e\u003cem\u003eFUNCTION\u003c\/em\u003e\u003c\/h2\u003e\n\u003cp\u003eFrom the factory, rear turn signal bulbs are powered by standard incandescent lights that light up white in color, and cast light through your red or amber tail light lens. This results in a washed-out color.\u003c\/p\u003e\n\u003cp\u003eNewer luxury vehicles are using LEDs for turn signals, because LEDs offer a crisp, instant on\/off function, increased brightness, and true, vibrant color. By replacing the bulbs in your vehicle, you can achieve this modern look!\u003c\/p\u003e\n\u003cp\u003eThe installation is 100% plug-and-play, just replace your factory bulb. The bulb may blink faster since it uses less power, and your vehicle thinks the bulb is out- to fix this, please see \"hyperblinking\" section below.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cem\u003eBULB DESIGN\u003c\/em\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHP48:\u003c\/strong\u003e This bulb is non-polar, CK compatible, with 48 Epistar 3014 LED chips. Thanks to the cap on the top, the light from this High Power Bulb is shined backwards and away from the bulb, not straight out. This means the output is excellent, because it uses the vehicle's housing completely, which then shines the light much more uniformly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHP11: \u003c\/strong\u003eFour side-firing 1.5W-rated Osram LED chips, and one 5W-rated LED chip on top, which is projected by a lens for maximum effective brightness. The bulb is housed in a machined aluminum casing, which provides superior heat diffusion for long life.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXP80:\u003c\/strong\u003e Each of the four sides of this bulb contains three 5W-rated chips, and the top is fitted with four more under a projector lens. This is the brightest self-contained automotive LED bulb on the market, and is housed in an aluminum casing with a textured finish for maximum heatsinking properties.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment. \u003c\/strong\u003eAll three bulbs use a quality inject-molded 7440 terminal, with a full-size base connector and proper pin alignment, designed for exact replacement of your factory 7440 bulb.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in your order is TWO BULBS.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cem\u003eCOLOR\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThese LEDs illuminate in a crisp, bright, \u003cstrong\u003eamber\u003c\/strong\u003e or \u003cstrong\u003ered\u003c\/strong\u003e hue. Choose the color of your rear turn signal lens.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cem\u003eBRIGHTNESS\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eDiode Dynamics offers several brightness options so you can choose what fits you best.  These options are listed by the design and the lumen output of each bulb: \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHP48:\u003c\/strong\u003e Slightly lower brightness than OEM bulbs, but still provides the crisp, modern instant on\/off of LED technology.\u003cbr\u003e\u003cstrong\u003eHP11:\u003c\/strong\u003e Slightly higher brightness than OEM bulbs.\u003cbr\u003e\u003cstrong\u003eXP80:\u003c\/strong\u003e Much brighter than OEM bulbs. These are bright!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLumens: BUYER BEWARE!\u003c\/strong\u003e Most sellers just provide \"calculated\" lumen numbers, based on the maximum potential brightness of the LED chips on the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is not accurate, as the design of an LED bulb does not get rid of heat fast enough to run the LEDs at maximum.\u003c\/p\u003e\n\u003cp\u003eThese \"calculated\" lumen ratings are much, much higher than the true, measured light output, so it will look like competitors' bulbs are brighter than ours. This is because Diode Dynamics does not provide inflated \"calculated\" numbers; we believe it is misleading. We test the actual brightness of the bulbs in our lab, to provide real lumen output measurements. Our measurements are accurate, but they are usually much lower than the misleading \"calculated\" figures. Please \u003ca href=\"http:\/\/www.diodedynamics.com\/store\/research\/research-led\/led-brightness.html\" target=\"_blank\"\u003eclick here\u003c\/a\u003e to learn more about LED brightness measurement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Diode Dynamics","offers":[{"title":"Red \/ HP48 \/ No","offer_id":28525516050,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true},{"title":"Red \/ HP48 \/ Yes","offer_id":28525515986,"sku":null,"price":50.0,"currency_code":"USD","in_stock":true},{"title":"Red \/ HP11 \/ No","offer_id":28525516178,"sku":null,"price":60.0,"currency_code":"USD","in_stock":true},{"title":"Red \/ HP11 \/ Yes","offer_id":28525516114,"sku":null,"price":70.0,"currency_code":"USD","in_stock":true},{"title":"Red \/ XP80 \/ No","offer_id":28525516306,"sku":null,"price":90.0,"currency_code":"USD","in_stock":true},{"title":"Red \/ XP80 \/ Yes","offer_id":28525516242,"sku":null,"price":100.0,"currency_code":"USD","in_stock":true},{"title":"Amber \/ HP48 \/ No","offer_id":28525516434,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true},{"title":"Amber \/ HP48 \/ Yes","offer_id":28525516370,"sku":null,"price":50.0,"currency_code":"USD","in_stock":true},{"title":"Amber \/ HP11 \/ No","offer_id":28525516562,"sku":null,"price":60.0,"currency_code":"USD","in_stock":true},{"title":"Amber \/ HP11 \/ Yes","offer_id":28525516498,"sku":null,"price":70.0,"currency_code":"USD","in_stock":true},{"title":"Amber \/ XP80 \/ No","offer_id":28525516690,"sku":null,"price":90.0,"currency_code":"USD","in_stock":true},{"title":"Amber \/ XP80 \/ Yes","offer_id":28525516626,"sku":null,"price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/diode-dynamics-rear-turn-signal-leds-for-2004-2016-subaru-wrx-pair-panda-motorworks-9273010.jpg?v=1770922211"},{"product_id":"2008-2014-subaru-wrx-sti-hatchback-tail-as-turn-backup-module-pair","title":"2008-2014 Subaru WRX\/STi Hatchback Tail as Turn™ +Backup Module (pair)","description":"\u003cp\u003e\u003cstrong\u003eNOTICE: Compatible with USDM models only \/ \u003cspan\u003e3M Adhessive tape not included\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit will make your LED tail light also function as the turn signal on your 2008-2014 Subaru WRX Hatchback. By eliminating the factory incandescent turn signal bulb, and instead operating it through your LED tail light, you will gain a much more modern appearance.\u003c\/p\u003e\n\u003cp\u003eUsing OEM plug-and-play tail light connectors, the base kit is 100% plug-and-play, with no wiring required. You don't even have to remove your tail lights!\u003c\/p\u003e\n\u003cp\u003eThis product was designed and fully manufactured by Diode Dynamics, in St. Louis, Missouri. It is fully made in USA.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e \u003cspan\u003eFor ease of installation, load resistors will be integrated into each module. This means you will not have to tap any factory wiring to eliminate hyperblinking, or change your flasher relay. If you do already have an LED flasher relay, you may continue using it with this product.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIf you wish, you can also convert the old turn signal socket to an extra high-mounted backup light! Each kit comes with the wires to accomplish this (see video for details) but you will need new white LED bulbs. You must use LEDs, not standard bulbs, because you will be drawing power from the backup light circuit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBACKUP LIGHT OPTIONS:\u003c\/strong\u003e\u003cbr\u003eFactory backup lights: 250 lumens\u003cbr\u003e\u003cstrong\u003eHP48: 280 lumens. \u003c\/strong\u003eSMD LEDs arranged radially.\u003cbr\u003e\u003cstrong\u003eHP11: 310 lumens. \u003c\/strong\u003eLED panels in an aluminum housing.\u003cbr\u003e\u003cstrong\u003eXP80: 510 lumens. \u003c\/strong\u003eHigh-power chips in an aluminum housing, designed for maximum output.\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":28525530706,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/diode-dynamics-2008-2014-subaru-wrxsti-hatchback-tail-as-turn-backup-module-pair-panda-motorworks-7070069.jpg?v=1770922211"},{"product_id":"front-turn-signal-leds-for-2015-2016-subaru-wrx-pair","title":"Front Turn Signal LEDs for 2015-2016 Subaru WRX (pair)","description":"\u003ch2\u003e\u003cem\u003eFUNCTION\u003c\/em\u003e\u003c\/h2\u003e\n\u003cp\u003eFrom the factory, turn signal bulbs are powered by standard incandescent lights that light up amber in color.\u003c\/p\u003e\n\u003cp\u003eNewer luxury vehicles are using LEDs for turn signals, because LEDs offer a crisp, instant on\/off, increased brightness, and true, vibrant color. By replacing the bulbs in your vehicle, you can achieve this modern look!\u003c\/p\u003e\n\u003cp\u003eThe installation is 100% plug-and-play, just replace your factory bulb. The bulb may blink faster since it uses less power, and your vehicle thinks the bulb is out- to fix this, please see \"hyperblinking\" section below.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cem\u003eBULB DESIGN\u003c\/em\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHP48:\u003c\/strong\u003e This bulb is non-polar, CK compatible, with 48 Epistar 3014 LED chips. Thanks to the cap on the top, the light from this High Power Bulb is shined backwards and away from the bulb, not straight out. This means the output is excellent, because it uses the vehicle's housing completely, which then shines the light much more uniformly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHP11: \u003c\/strong\u003eFour side-firing 1.5W-rated Osram LED chips, and one 5W-rated LED chip on top, which is projected by a lens for maximum effective brightness. The bulb is housed in a machined aluminum casing, which provides superior heat diffusion for long life.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXP80:\u003c\/strong\u003e Each of the four sides of this bulb contains three 5W-rated chips, and the top is fitted with four more under a projector lens. This is the brightest self-contained automotive LED bulb on the market, and is housed in an aluminum casing with a textured finish for maximum heatsinking properties.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment. \u003c\/strong\u003eAll three bulbs use a quality inject-molded 7440 terminal, with a standard base connector and proper pin alignment, designed for exact replacement of your factory 7440 bulb.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in your order is TWO BULBS.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cem\u003eCOLOR\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThese LEDs illuminate in a crisp, bright, \u003cstrong\u003eamber\u003c\/strong\u003e hue.\u003c\/p\u003e\n\u003cp\u003eDiode Dynamics only list amber bulbs for the front turn signal. This is because other colors, such as white and red, are not legal for front turn signal use. Please view other pages for other colors and applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cem\u003eBRIGHTNESS\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eDiode Dynamics offers several brightness options so you can choose what fits you best.  These options are listed by the design and the lumen output of each bulb: \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHP48:\u003c\/strong\u003e Slightly lower brightness than OEM bulbs, but still provides the crisp, modern instant on\/off of LED technology.\u003cbr\u003e\u003cstrong\u003eHP11:\u003c\/strong\u003e Slightly higher brightness than OEM bulbs.\u003cbr\u003e\u003cstrong\u003eXP80:\u003c\/strong\u003e Much brighter than OEM bulbs. These are bright!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLumens: BUYER BEWARE!\u003c\/strong\u003e Most sellers just provide \"calculated\" lumen numbers, based on the maximum potential brightness of the LED chips on the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is not accurate, as the design of an LED bulb does not get rid of heat fast enough to run the LEDs at maximum.\u003c\/p\u003e\n\u003cp\u003eThese \"calculated\" lumen ratings are much, much higher than the true, measured light output, so it will look like competitors' bulbs are brighter than ours. This is because Diode Dynamics does not provide inflated \"calculated\" numbers; we believe it is misleading. We test the actual brightness of the bulbs in our lab, to provide real lumen output measurements. Our measurements are accurate, but they are usually much lower than the misleading \"calculated\" figures. Please \u003ca href=\"http:\/\/www.diodedynamics.com\/store\/research\/research-led\/led-brightness.html\" target=\"_blank\"\u003eclick here\u003c\/a\u003e to learn more about LED brightness measurement.\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"HP48","offer_id":28525537426,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true},{"title":"HP11","offer_id":28525537490,"sku":null,"price":60.0,"currency_code":"USD","in_stock":true},{"title":"XP80","offer_id":28525537554,"sku":null,"price":90.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/diode-dynamics-front-turn-signal-leds-for-2015-2016-subaru-wrx-pair-panda-motorworks-1117733.jpg?v=1770922210"},{"product_id":"front-turn-signal-leds-for-2008-2014-subaru-wrx-sti-pair","title":"Front Turn Signal LEDs for 2008-2014 Subaru WRX STi (pair)","description":"\u003ch2\u003e\u003cem\u003eFUNCTION\u003c\/em\u003e\u003c\/h2\u003e\n\u003cp\u003eFrom the factory, turn signal bulbs are powered by standard incandescent lights that light up amber in color.\u003c\/p\u003e\n\u003cp\u003eNewer luxury vehicles are using LEDs for turn signals, because LEDs offer a crisp, instant on\/off, increased brightness, and true, vibrant color. By replacing the bulbs in your vehicle, you can achieve this modern look!\u003c\/p\u003e\n\u003cp\u003eYou can even add functionality to your vehicle with switchback bulbs! These light up bright white for running lights instead of dim amber, but still blink amber when you activate the turn signals, for a unique dual-color effect!\u003c\/p\u003e\n\u003cp\u003eThe installation is 100% plug-and-play, just replace your factory bulb. The bulb may blink faster since it uses less power, and your vehicle thinks the bulb is out- to fix this, please see \"hyperblinking\" section below.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cem\u003eBULB DESIGN\u003c\/em\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHP48:\u003c\/strong\u003e This bulb is non-polar, CK compatible, with 48 Epistar 3014 LED chips. Thanks to the cap on the top, the light from this High Power Bulb is shined backwards and away from the bulb, not straight out. This means the output is excellent, because it uses the vehicle's housing completely, which then shines the light much more uniformly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHP11: \u003c\/strong\u003eFour side-firing 1.5W-rated Osram LED chips, and one 5W-rated LED chip on top, which is projected by a lens for maximum effective brightness. The bulb is housed in a machined aluminum casing, which provides superior heat diffusion for long life.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXP80:\u003c\/strong\u003e Each of the four sides of this bulb contains three 5W-rated chips, and the top is fitted with four more under a projector lens. This is the brightest self-contained automotive LED bulb on the market, and is housed in an aluminum casing with a textured finish for maximum heatsinking properties.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHP24:\u003c\/strong\u003e 16 amber and 8 white, high-power LED chips. Full aluminum body for durability and advanced digital latching circuit for color control. 6000k, Cool White to match your HIDs or other LED applications. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment. \u003c\/strong\u003eAll three bulbs use a quality aluminum 1157 terminal, with a standard base connector and proper pin alignment, designed for exact replacement of your factory 1157 bulb.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in your order is TWO BULBS.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cem\u003eCOLOR\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eAmber:\u003c\/strong\u003e These LEDs illuminate in a crisp, bright, amber color.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwitchback Option:\u003c\/strong\u003e Your vehicle may be able to use a specialty bulb known as \"switchback.\" This bulb is only suitable when there is a clear reflector. Normally, your front turn signal lights up half power amber when you turn on your headlights, and flashes full power amber when the turn signal is activated.\u003c\/p\u003e\n\u003cp\u003eBy using this dual-filament design, along with an integrated controller chip in the bulb, you can get a very cool effect: the switchback bulb lights up white when your headlights are turned on, and flashes amber when you use the turn signals. When you switch the turn signal off, it \"switches back\" to white. This allows you to gain a uniform white appearance in the front of the vehicle at night, while still having amber turn signals.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003eWe only list amber and switchback bulbs for the front turn signal. This is because other colors, such as white and red, are not legal for front turn signal use. Please view other pages for other colors and applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cem\u003eBRIGHTNESS\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eDiode Dynamics offers several brightness options so you can choose what fits you best.  These options are listed by the design and the lumen output of each bulb:\u003c\/p\u003e\n\u003cp\u003eThe amber bulbs in this listing are dual-brightness, and will illuminate at 60% power for parking\/running lamp, and 100% for full turn signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHP48:\u003c\/strong\u003e Slightly lower brightness than OEM bulbs, but still provides the crisp, modern instant on\/off of LED technology.\u003cbr\u003e\u003cstrong\u003eHP11:\u003c\/strong\u003e Slightly higher brightness than OEM bulbs.\u003cbr\u003e\u003cstrong\u003eXP80:\u003c\/strong\u003e Much brighter than OEM bulbs. These are bright!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLumens: BUYER BEWARE!\u003c\/strong\u003e Most sellers just provide \"calculated\" lumen numbers, based on the maximum potential brightness of the LED chips on the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is not accurate, as the design of an LED bulb does not get rid of heat fast enough to run the LEDs at maximum.\u003c\/p\u003e\n\u003cp\u003eThese \"calculated\" lumen ratings are much, much higher than the true, measured light output, so it will look like competitors' bulbs are brighter than ours. This is because Diode Dynamics does not provide inflated \"calculated\" numbers; we believe it is misleading. We test the actual brightness of the bulbs in our lab, to provide real lumen output measurements. Our measurements are accurate, but they are usually much lower than the misleading \"calculated\" figures. Please \u003ca href=\"http:\/\/www.diodedynamics.com\/store\/research\/research-led\/led-brightness.html\" target=\"_blank\"\u003eclick here\u003c\/a\u003e to learn more about LED brightness measurement.\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Amber \/ Switchback Option","offer_id":28525545234,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true},{"title":"Amber \/ HP48","offer_id":28525545298,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true},{"title":"Amber \/ HP11","offer_id":28525545362,"sku":null,"price":60.0,"currency_code":"USD","in_stock":true},{"title":"Amber \/ XP80","offer_id":28525545426,"sku":null,"price":90.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/diode-dynamics-front-turn-signal-leds-for-2008-2014-subaru-wrx-sti-pair-panda-motorworks-7086613.jpg?v=1770922210"},{"product_id":"fog-light-leds-for-2011-2014-subaru-wrx-pair","title":"Fog Light LEDs for 2011-2014 Subaru WRX (pair)","description":"\u003ch2\u003e\u003cem\u003eFUNCTION\u003c\/em\u003e\u003c\/h2\u003e\n\u003cp\u003eFog Light LED bulbs are an excellent way to improve the appearance of your vehicle. From the factory, most vehicles come with halogen bulbs, which project in a yellowish light. By replacing them with LEDs, you can create a modern appearance with the cool white light of LEDs.\u003c\/p\u003e\n\u003cp\u003eThe installation is 100% plug-and-play, just replace your factory bulb!\u003c\/p\u003e\n\u003cp\u003ePlease note: Fog Light LEDs are primarily for cosmetic upgrade. Some models may not provide an increase in output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cem\u003eBULB DESIGN\u003c\/em\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHP48:\u003c\/strong\u003e This bulb is designed with 48 Epistar 3014 LED chips. Thanks to the cap on the top, the light from this High Power Bulb is shined backwards and away from the bulb, not straight out. This means the output is excellent, because it uses the vehicle's housing completely, which then shines the light much more uniformly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXP80: \u003c\/strong\u003eEach of the four sides of this bulb contains three 5W-rated chips, and the top is fitted with four more, under a projector lens. This is the brightest self-contained automotive LED bulb on the market, and is housed in an aluminum casing with a textured finish for maximum heatsinking properties.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXML2: \u003c\/strong\u003eTwo opposing genuine CREE XM-L2 chips, driven at high power by self-contained regulator unit, in an attractive cast-aluminum housing. Fully waterproof, non-polar, modular design. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment. \u003c\/strong\u003eSMD, HP, and XP bulbs use an inject-molded terminal, with a full-size base connector, designed for exact replacement of your factory bulb. The XML2 bulb fits in the same way, but also requires an additional 2\" of clearance behind the bulb socket- see pictures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in your order is TWO BULBS.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cem\u003eCOLOR\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThese LEDs illuminate in a crisp, bright, \u003cstrong\u003ecool white\u003c\/strong\u003e hue. The XML2 is also available in \u003cstrong\u003enatural white, pure white, and yellow.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cem\u003eBRIGHTNESS\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eDiode Dynamics offers several brightness options so you can choose what fits you best. These options are listed by the design and the lumen output of each bulb, compared to the factory bulb.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHP48: 265 lumens. \u003c\/strong\u003eSlightly lower brightness than factory.\u003cbr\u003e\u003cstrong\u003eXP80: 510 lumens.\u003c\/strong\u003e Similar brightness to factory.\u003cbr\u003e\u003cstrong\u003eXML2: 1410 lumens.\u003c\/strong\u003e Much brighter than factory. These are bright!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLumens: BUYER BEWARE!\u003c\/strong\u003e Most sellers just provide \"calculated\" lumen numbers, based on the maximum potential brightness of the LED chips on the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is not accurate, as the design of an LED bulb does not get rid of heat fast enough to run the LEDs at maximum. \u003c\/p\u003e\n\u003cp\u003eThese \"calculated\" lumen ratings are much, much higher than the true, measured light output, so it will look like competitors' bulbs are brighter than ours. This is because Diode Dynamics does not provide inflated \"calculated\" numbers; we believe it is misleading. We test the actual brightness of the bulbs in our lab, to provide real lumen output measurements. Our measurements are accurate, but they are usually much lower than the misleading \"calculated\" figures. Please \u003ca href=\"http:\/\/www.diodedynamics.com\/store\/research\/research-led\/led-brightness.html\" target=\"_blank\"\u003eclick here\u003c\/a\u003e to learn more about LED brightness measurement.\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Natural White \/ HP48","offer_id":28525555154,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true},{"title":"Natural White \/ XP80","offer_id":28525555218,"sku":null,"price":90.0,"currency_code":"USD","in_stock":true},{"title":"Natural White \/ XML2","offer_id":28525555282,"sku":null,"price":120.0,"currency_code":"USD","in_stock":true},{"title":"Cool White \/ HP48","offer_id":28525555346,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true},{"title":"Cool White \/ XP80","offer_id":28525555410,"sku":null,"price":90.0,"currency_code":"USD","in_stock":true},{"title":"Cool White \/ XML2","offer_id":28525555474,"sku":null,"price":120.0,"currency_code":"USD","in_stock":true},{"title":"Pure White \/ HP48","offer_id":28525555538,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true},{"title":"Pure White \/ XP80","offer_id":28525555602,"sku":null,"price":90.0,"currency_code":"USD","in_stock":true},{"title":"Pure White \/ XML2","offer_id":28525555666,"sku":null,"price":120.0,"currency_code":"USD","in_stock":true},{"title":"Yellow \/ HP48","offer_id":28525555730,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true},{"title":"Yellow \/ XP80","offer_id":28525555794,"sku":null,"price":90.0,"currency_code":"USD","in_stock":true},{"title":"Yellow \/ XML2","offer_id":28525555858,"sku":null,"price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/diode-dynamics-fog-light-leds-for-2011-2014-subaru-wrx-pair-panda-motorworks-3759208.jpg?v=1770922209"},{"product_id":"backup-leds-for-2004-2014-subaru-wrx-pair","title":"Backup LEDs for 2004-2014 Subaru WRX (pair)","description":"\u003ch2\u003e\u003cem\u003eBULB DESIGN\u003c\/em\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHP48:\u003c\/strong\u003e This bulb is non-polar, CK compatible, with 48 Epistar 3014 LED chips. Thanks to the cap on the top, the light from this High Power Bulb is shined backwards and away from the bulb, not straight out. This means the output is excellent, because it uses the vehicle's housing completely, which then shines the light much more uniformly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHP11: \u003c\/strong\u003eFour side-firing 1.5W-rated Osram LED chips, and one 5W-rated LED chip on top, which is projected by a lens for maximum effective brightness. The bulb is housed in a machined aluminum casing, which provides superior heat diffusion for long life.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXP80: \u003c\/strong\u003eEach of the four sides of this bulb contains three 5W-rated chips, and the top is fitted with four more under a projector lens. This is the brightest self-contained automotive LED bulb on the market, and is housed in an aluminum casing with a textured finish for maximum heatsinking properties.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment. \u003c\/strong\u003eAll three bulbs use a quality inject-molded 7440 terminal, with a locking base connector and proper pin alignment, designed for exact replacement of your factory 7440 bulb.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in your order is TWO BULBS.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cem\u003eCOLOR\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThese LEDs illuminate in a crisp, cool, bright, \u003cstrong\u003ewhite\u003c\/strong\u003e hue for maximum light output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cem\u003eBRIGHTNESS\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eDiode Dynamics offers several brightness options so you can choose what fits you best.  These options are listed by the design and the lumen output of each bulb: \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHP48:\u003c\/strong\u003e Slightly lower brightness than OEM bulbs, but still provides the crisp, modern instant on\/off of LED technology.\u003cbr\u003e\u003cstrong\u003eHP11:\u003c\/strong\u003e Slightly higher brightness than OEM bulbs.\u003cbr\u003e\u003cstrong\u003eXP80:\u003c\/strong\u003e Much brighter than OEM bulbs. These are bright!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLumens.\u003c\/strong\u003e \u003cstrong\u003eBUYER BEWARE!\u003c\/strong\u003e\u003cspan\u003e Most sellers just provide \"calculated\" lumen numbers, based on the maximum potential brightness of the LED chips on the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is not accurate, as the design of an LED bulb does not get rid of heat fast enough to run the LEDs at maximum.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese \"calculated\" lumen ratings are much, much higher than the true, measured light output, so it will look like competitors' bulbs are brighter than ours. This is because Diode Dynamics does not provide inflated \"calculated\" numbers; we believe it is misleading. We test the actual brightness of the bulbs in our lab, to provide real lumen output measurements. Our measurements are accurate, but they are usually much lower than the misleading \"calculated\" figures. Please \u003ca href=\"http:\/\/www.diodedynamics.com\/store\/research\/research-led\/led-brightness.html\" target=\"_blank\"\u003eclick here\u003c\/a\u003e to learn more about LED brightness measurement.\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"HP48","offer_id":28525564178,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true},{"title":"HP11","offer_id":28525564242,"sku":null,"price":60.0,"currency_code":"USD","in_stock":true},{"title":"XP80","offer_id":28525564306,"sku":null,"price":90.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/diode-dynamics-backup-leds-for-2004-2014-subaru-wrx-pair-panda-motorworks-5551748.jpg?v=1770922209"},{"product_id":"fog-light-leds-for-2008-2011-subaru-wrx-pair","title":"Fog Light LEDs for 2008-2011 Subaru WRX (pair)","description":"\u003ch2\u003e\u003cem\u003eFUNCTION\u003c\/em\u003e\u003c\/h2\u003e\n\u003cp\u003eFog Light LED bulbs are an excellent way to improve the appearance of your vehicle. From the factory, most vehicles come with halogen bulbs, which project in a yellowish light. By replacing them with LEDs, you can create a modern appearance with the cool white light of LEDs.\u003c\/p\u003e\n\u003cp\u003eThe installation is 100% plug-and-play, just replace your factory bulb!\u003c\/p\u003e\n\u003cp\u003ePlease note: Fog Light LEDs are primarily for cosmetic upgrade. Some models may not provide an increase in output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cem\u003eBULB DESIGN\u003c\/em\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHP48:\u003c\/strong\u003e This bulb is designed with 48 Epistar 3014 LED chips. Thanks to the cap on the top, the light from this High Power Bulb is shined backwards and away from the bulb, not straight out. This means the output is excellent, because it uses the vehicle's housing completely, which then shines the light much more uniformly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXP80: \u003c\/strong\u003eEach of the four sides of this bulb contains three 5W-rated chips, and the top is fitted with four more, under a projector lens. This is the brightest self-contained automotive LED bulb on the market, and is housed in an aluminum casing with a textured finish for maximum heatsinking properties.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXML2: \u003c\/strong\u003eTwo opposing genuine CREE XM-L2 chips, driven at high power by self-contained regulator unit, in an attractive cast-aluminum housing. Fully waterproof, non-polar, modular design. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment. \u003c\/strong\u003eSMD, HP, and XP bulbs use an inject-molded terminal, with a full-size base connector, designed for exact replacement of your factory bulb. The XML2 bulb fits in the same way, but also requires an additional 2\" of clearance behind the bulb socket- see pictures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in your order is TWO BULBS.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cem\u003eCOLOR\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThese LEDs illuminate in a crisp, bright, \u003cstrong\u003ecool white\u003c\/strong\u003e hue. The XML2 is also available in \u003cstrong\u003enatural white, pure white, and yellow.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cem\u003eBRIGHTNESS\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eDiode Dynamics offers several brightness options so you can choose what fits you best. These options are listed by the design and the lumen output of each bulb, compared to the factory bulb.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHP48: 265 lumens. \u003c\/strong\u003eSlightly lower brightness than factory.\u003cbr\u003e\u003cstrong\u003eXP80: 510 lumens.\u003c\/strong\u003e Similar brightness to factory.\u003cbr\u003e\u003cstrong\u003eXML2: 1410 lumens.\u003c\/strong\u003e Much brighter than factory. These are bright!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLumens: BUYER BEWARE!\u003c\/strong\u003e Most sellers just provide \"calculated\" lumen numbers, based on the maximum potential brightness of the LED chips on the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is not accurate, as the design of an LED bulb does not get rid of heat fast enough to run the LEDs at maximum. \u003c\/p\u003e\n\u003cp\u003eThese \"calculated\" lumen ratings are much, much higher than the true, measured light output, so it will look like competitors' bulbs are brighter than ours. This is because Diode Dynamics does not provide inflated \"calculated\" numbers; we believe it is misleading. We test the actual brightness of the bulbs in our lab, to provide real lumen output measurements. Our measurements are accurate, but they are usually much lower than the misleading \"calculated\" figures. Please \u003ca href=\"http:\/\/www.diodedynamics.com\/store\/research\/research-led\/led-brightness.html\" target=\"_blank\"\u003eclick here\u003c\/a\u003e to learn more about LED brightness measurement.\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Natural White \/ HP48","offer_id":28525579154,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true},{"title":"Natural White \/ XP80","offer_id":28525579218,"sku":null,"price":90.0,"currency_code":"USD","in_stock":true},{"title":"Natural White \/ XML2","offer_id":28525579282,"sku":null,"price":120.0,"currency_code":"USD","in_stock":true},{"title":"Pure White \/ HP48","offer_id":28525579346,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true},{"title":"Pure White \/ XP80","offer_id":28525579410,"sku":null,"price":90.0,"currency_code":"USD","in_stock":true},{"title":"Pure White \/ XML2","offer_id":28525579474,"sku":null,"price":120.0,"currency_code":"USD","in_stock":true},{"title":"Cool White \/ HP48","offer_id":28525579538,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true},{"title":"Cool White \/ XP80","offer_id":28525579602,"sku":null,"price":90.0,"currency_code":"USD","in_stock":true},{"title":"Cool White \/ XML2","offer_id":28525579666,"sku":null,"price":120.0,"currency_code":"USD","in_stock":true},{"title":"Yellow \/ HP48","offer_id":28525579730,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true},{"title":"Yellow \/ XP80","offer_id":28525579794,"sku":null,"price":90.0,"currency_code":"USD","in_stock":true},{"title":"Yellow \/ XML2","offer_id":28525579858,"sku":null,"price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/diode-dynamics-fog-light-leds-for-2008-2011-subaru-wrx-pair-panda-motorworks-5579861.jpg?v=1770922209"},{"product_id":"hd-led-halos-for-2015-2016-subaru-wrx-pair","title":"HD LED Halos for 2015-2016 Subaru WRX (Pair)","description":"\u003cp\u003eIntroducing Diode Dynamics HDLED Halos! The first and only LED halos that are 100% Made in USA.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHDHalo Technology:\u003c\/strong\u003e These halo rings feature all the benefits of our exclusive HDHalo technology, including:\u003cbr\u003e- Proprietary durable phosphor coating, to create uniform, solid appearance.\u003cbr\u003e- Extremely bright, high-density LEDs that are visible even in direct sunlight.\u003cbr\u003e- Multi-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes.\u003cbr\u003e- Integrated mounting tabs for easy installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYour order includes two halo rings\u003c\/strong\u003e, two drivers, two pigtails for easy wiring, and eight T-tap connectors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSizing:\u003c\/strong\u003e All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWiring:\u003c\/strong\u003e All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePWM Control:\u003c\/strong\u003e Aside from the high brightness and perfectly uniform output, one great feature of these halos is the PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhite:\u003c\/strong\u003e Low Power, 50% brightness\u003cbr\u003e\u003cstrong\u003eRed:\u003c\/strong\u003e High Power, 100% brightness\u003cbr\u003e\u003cstrong\u003eAmber: \u003c\/strong\u003eSignal\u003cbr\u003e\u003cstrong\u003eBlack:\u003c\/strong\u003e Ground\u003c\/p\u003e\n\u003cp\u003eThe white and red wires both activate the main color, at different brightness levels. For switchback rings, this is 6000K white. Your order will ship by default with \"low priority\" drivers, meaning that if both wires are powered, low power will take priority. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. Of course, this is completely optional, and you can just use one of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eThe signal wire will output even higher power to the ring, so it cannot be run constantly, or the driver will overheat. It should only be connected to a turn signal. If you'd like amber for a running light, please select the single color amber rings.\u003c\/p\u003e\n\u003cp\u003eFor single colors, the same drivers are included, so you can operate the light with low power, high power, and as a turn signal that switches off and back on completely while blinking. If you are interested in solid red halos for tail light use, just email us to request \"high priority\" drivers after you place your order. With high priority drivers, you can use a red halo as running, brake, and turn signal, without any extra drivers or controllers needed!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical Specifications:\u003c\/strong\u003e \u003cbr\u003eInput Voltage: 9-16V\u003cbr\u003eInput Power: Dependent on size, generally one watt per 10mm diameter in \"high power\" mode\u003cbr\u003eTotal Light Output: Dependent on color and size. They're bright! Please contact us for exact measured output figures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e If you are installing these in headlights or tail lights, professional installation is strongly recommended, as the factory lamps must be opened for installation. The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding.\u003c\/p\u003e\n\u003cp\u003eAll Diode Dynamics products are backed by a 3-year replacement warranty.\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Cool White","offer_id":28544354130,"sku":null,"price":60.0,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":28544354194,"sku":null,"price":60.0,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":28544354258,"sku":null,"price":60.0,"currency_code":"USD","in_stock":true},{"title":"Amber","offer_id":28544354322,"sku":null,"price":60.0,"currency_code":"USD","in_stock":true},{"title":"Switchback","offer_id":28544354386,"sku":null,"price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/diode-dynamics-hd-led-halos-for-2015-2016-subaru-wrx-pair-panda-motorworks-6417128.jpg?v=1770922209"},{"product_id":"front-turn-signal-leds-for-2008-2014-subaru-wrx-pair","title":"Front Turn Signal LEDs for 2008-2014 Subaru WRX (pair)","description":"\u003ch2\u003e\u003cem\u003eFUNCTION\u003c\/em\u003e\u003c\/h2\u003e\n\u003cp\u003eFrom the factory, turn signal bulbs are powered by standard incandescent lights that light up amber in color.\u003c\/p\u003e\n\u003cp\u003eNewer luxury vehicles are using LEDs for turn signals, because LEDs offer a crisp, instant on\/off, increased brightness, and true, vibrant color. By replacing the bulbs in your vehicle, you can achieve this modern look!\u003c\/p\u003e\n\u003cp\u003eYou can even add functionality to your vehicle with switchback bulbs! These light up bright white for running lights instead of dim amber, but still blink amber when you activate the turn signals, for a unique dual-color effect!\u003c\/p\u003e\n\u003cp\u003eThe installation is 100% plug-and-play, just replace your factory bulb. The bulb may blink faster since it uses less power, and your vehicle thinks the bulb is out- to fix this, please see \"hyperblinking\" section below.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cem\u003eBULB DESIGN\u003c\/em\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHP48:\u003c\/strong\u003e This bulb is non-polar, CK compatible, with 48 Epistar 3014 LED chips. Thanks to the cap on the top, the light from this High Power Bulb is shined backwards and away from the bulb, not straight out. This means the output is excellent, because it uses the vehicle's housing completely, which then shines the light much more uniformly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHP11: \u003c\/strong\u003eFour side-firing 1.5W-rated Osram LED chips, and one 5W-rated LED chip on top, which is projected by a lens for maximum effective brightness. The bulb is housed in a machined aluminum casing, which provides superior heat diffusion for long life.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXP80:\u003c\/strong\u003e Each of the four sides of this bulb contains three 5W-rated chips, and the top is fitted with four more under a projector lens. This is the brightest self-contained automotive LED bulb on the market, and is housed in an aluminum casing with a textured finish for maximum heatsinking properties.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHP24:\u003c\/strong\u003e 16 amber and 8 white, high-power LED chips. Full aluminum body for durability and advanced digital latching circuit for color control. 6000k, Cool White to match your HIDs or other LED applications. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment. \u003c\/strong\u003eAll three bulbs use a quality aluminum 1157 terminal, with a standard base connector and proper pin alignment, designed for exact replacement of your factory 1157 bulb.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in your order is TWO BULBS.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cem\u003eCOLOR\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eAmber:\u003c\/strong\u003e These LEDs illuminate in a crisp, bright, amber color.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwitchback Option:\u003c\/strong\u003e Your vehicle may be able to use a specialty bulb known as \"switchback.\" This bulb is only suitable when there is a clear reflector. Normally, your front turn signal lights up half power amber when you turn on your headlights, and flashes full power amber when the turn signal is activated.\u003c\/p\u003e\n\u003cp\u003eBy using this dual-filament design, along with an integrated controller chip in the bulb, you can get a very cool effect: the switchback bulb lights up white when your headlights are turned on, and flashes amber when you use the turn signals. When you switch the turn signal off, it \"switches back\" to white. This allows you to gain a uniform white appearance in the front of the vehicle at night, while still having amber turn signals.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003eWe only list amber and switchback bulbs for the front turn signal. This is because other colors, such as white and red, are not legal for front turn signal use. Please view other pages for other colors and applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cem\u003eBRIGHTNESS\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eDiode Dynamics offers several brightness options so you can choose what fits you best.  These options are listed by the design and the lumen output of each bulb:\u003c\/p\u003e\n\u003cp\u003eThe amber bulbs in this listing are dual-brightness, and will illuminate at 60% power for parking\/running lamp, and 100% for full turn signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHP48:\u003c\/strong\u003e Slightly lower brightness than OEM bulbs, but still provides the crisp, modern instant on\/off of LED technology.\u003cbr\u003e\u003cstrong\u003eHP11:\u003c\/strong\u003e Slightly higher brightness than OEM bulbs.\u003cbr\u003e\u003cstrong\u003eXP80:\u003c\/strong\u003e Much brighter than OEM bulbs. These are bright!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLumens: BUYER BEWARE!\u003c\/strong\u003e Most sellers just provide \"calculated\" lumen numbers, based on the maximum potential brightness of the LED chips on the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is not accurate, as the design of an LED bulb does not get rid of heat fast enough to run the LEDs at maximum.\u003c\/p\u003e\n\u003cp\u003eThese \"calculated\" lumen ratings are much, much higher than the true, measured light output, so it will look like competitors' bulbs are brighter than ours. This is because Diode Dynamics does not provide inflated \"calculated\" numbers; we believe it is misleading. We test the actual brightness of the bulbs in our lab, to provide real lumen output measurements. Our measurements are accurate, but they are usually much lower than the misleading \"calculated\" figures. Please \u003ca href=\"http:\/\/www.diodedynamics.com\/store\/research\/research-led\/led-brightness.html\" target=\"_blank\"\u003eclick here\u003c\/a\u003e to learn more about LED brightness measurement.\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Switchback","offer_id":28544366034,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true},{"title":"HP48","offer_id":28544366098,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true},{"title":"HP11","offer_id":28544366162,"sku":null,"price":60.0,"currency_code":"USD","in_stock":true},{"title":"XP80","offer_id":28544366226,"sku":null,"price":90.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/diode-dynamics-front-turn-signal-leds-for-2008-2014-subaru-wrx-pair-panda-motorworks-7573163.jpg?v=1770922209"},{"product_id":"tail-light-leds-for-2011-2014-subaru-wrx-sti-pair","title":"Tail Light LEDs for 2011-2014 Subaru WRX STi (pair)","description":"\u003ch2\u003e\u003cem\u003eFUNCTION\u003c\/em\u003e\u003c\/h2\u003e\n\u003cp\u003eFrom the factory, tail light bulbs are powered by standard incandescant lights that light up white in color, and cast light through your red or amber tail light lens. This results in a washed-out color.\u003c\/p\u003e\n\u003cp\u003eNewer luxury vehicles are using LEDs for turn signals, because LEDs offer a crisp, instant on\/off function, increased brightness, and true, vibrant color. By replacing the bulbs in your vehicle, you can achieve this modern look!\u003c\/p\u003e\n\u003cp\u003eThe installation is 100% plug-and-play, just replace your factory bulb. The bulb may blink faster since it uses less power, and your vehicle thinks the bulb is out- to fix this, please see \"hyperblinking\" section below.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cem\u003eBULB DESIGN\u003c\/em\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHP48:\u003c\/strong\u003e This bulb is non-polar, CK compatible, with 48 Epistar 3014 LED chips. Thanks to the cap on the top, the light from this High Power Bulb is shined backwards and away from the bulb, not straight out. This means the output is excellent, because it uses the vehicle's housing completely, which then shines the light much more uniformly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHP11: \u003c\/strong\u003eFour side-firing 1.5W-rated Osram LED chips, and one 5W-rated LED chip on top, which is projected by a lens for maximum effective brightness. The bulb is housed in a machined aluminum casing, which provides superior heat diffusion for long life.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXP80: \u003c\/strong\u003eEach of the four sides of this bulb contains three 5W-rated chips, and the top is fitted with four more under a projector lens. This is the brightest self-contained automotive LED bulb on the market, and is housed in an aluminum casing with a textured finish for maximum heatsinking properties.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment. \u003c\/strong\u003eAll three bulbs use a quality inject-molded 1157 terminal, with a full-size base connector and proper pin alignment, designed for exact replacement of your factory 1157 bulb.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in your order is TWO BULBS.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cem\u003eCOLOR\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThese LEDs illuminate in a crisp, bright, \u003cstrong\u003ered\u003c\/strong\u003e hue. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cem\u003eBRIGHTNESS\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eDiode Dynamics offers several brightness options so you can choose what fits you best.  These options are listed by the design and the lumen output of each bulb:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHP48:\u003c\/strong\u003e Slightly lower brightness than OEM bulbs, but still provides the crisp, modern instant on\/off of LED technology.\u003cbr\u003e\u003cstrong\u003eHP11:\u003c\/strong\u003e Slightly higher brightness than OEM bulbs.\u003cbr\u003e\u003cstrong\u003eXP80:\u003c\/strong\u003e Much brighter than OEM bulbs. These are bright!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLumens: BUYER BEWARE!\u003c\/strong\u003e Most sellers just provide \"calculated\" lumen numbers, based on the maximum potential brightness of the LED chips on the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is not accurate, as the design of an LED bulb does not get rid of heat fast enough to run the LEDs at maximum.\u003c\/p\u003e\n\u003cp\u003eThese \"calculated\" lumen ratings are much, much higher than the true, measured light output, so it will look like competitors' bulbs are brighter than ours. This is because Diode Dynamics does not provide inflated \"calculated\" numbers; we believe it is misleading. We test the actual brightness of the bulbs in our lab, to provide real lumen output measurements. Our measurements are accurate, but they are usually much lower than the misleading \"calculated\" figures. Please \u003ca href=\"http:\/\/www.diodedynamics.com\/store\/research\/research-led\/led-brightness.html\" target=\"_blank\"\u003eclick here\u003c\/a\u003e to learn more about LED brightness measurement.\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"HP48","offer_id":28544384530,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true},{"title":"HP11","offer_id":28544384594,"sku":null,"price":60.0,"currency_code":"USD","in_stock":true},{"title":"XP80","offer_id":28544384658,"sku":null,"price":90.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/diode-dynamics-tail-light-leds-for-2011-2014-subaru-wrx-sti-pair-panda-motorworks-1749367.jpg?v=1770922209"},{"product_id":"2015-2016-subaru-wrx-sti-tail-as-turn-backup-module-pair","title":"2015-2016 Subaru WRX \/ STi Tail as Turn™ +Backup Module (pair)","description":"\u003cp\u003e\u003cstrong\u003eNOTICE: Compatible with USDM models only \/ \u003cspan\u003e3M Adhessive tape not included\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit will make your LED tail light also function as the turn signal on your 2015+ Subaru WRX or STi. By eliminating the factory incandescent turn signal bulb, and instead operating it through your LED tail light, you will gain a much more modern appearance.\u003c\/p\u003e\n\u003cp\u003eUsing OEM plug-and-play tail light connectors, the base kit is 100% plug-and-play, with no wiring required. You don't even have to remove your tail lights!\u003c\/p\u003e\n\u003cp\u003eThis product was designed and fully manufactured by Diode Dynamics, in St. Louis, Missouri. It is fully made in USA.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e since you will be eliminating your turn signal with this mod, your vehicle will think the turn signal bulb is out. To restore normal flashing speed, you will need to change your turn signal flasher module, which is the part that controls flashing speed. The installation is simple- \u003ca href=\"https:\/\/www.youtube.com\/watch?v=AAEz3YC8SCA\"\u003eplease see our video here\u003c\/a\u003e. If you already have an LED flasher module, you will not need another one.\u003c\/p\u003e\n\u003cp\u003eThis product is designed to be used with Diode Dynamics products. Use of non Diode Dynamics \u003cspan\u003eproducts \u003c\/span\u003emay result in improper function.\u003c\/p\u003e\n\u003cp\u003eIf you wish, you can also convert the old turn signal socket to an extra high-mounted backup light! Each kit comes with the wires to accomplish this (see video for details) but you will need new white LED bulbs. You must use LEDs, not standard bulbs, because you will be drawing power from the backup light circuit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBACKUP LIGHT OPTIONS:\u003c\/strong\u003e\u003cbr\u003eFactory backup lights: 250 lumens\u003cbr\u003e\u003cstrong\u003eHP11: 310 lumens. \u003c\/strong\u003eLED panels in an aluminum housing.\u003cbr\u003e\u003cstrong\u003eXP80: 510 lumens. \u003c\/strong\u003eHigh-power chips in an aluminum housing, designed for maximum output.\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":28544406930,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/diode-dynamics-2015-2016-subaru-wrx-sti-tail-as-turn-backup-module-pair-panda-motorworks-5617820.jpg?v=1770922209"},{"product_id":"fog-light-leds-for-2015-2016-subaru-wrx-pair","title":"Fog Light LEDs for 2015-2016 Subaru WRX (pair)","description":"\u003ch2\u003e\u003cem\u003eFUNCTION\u003c\/em\u003e\u003c\/h2\u003e\n\u003cp\u003eFog Light LED bulbs are an excellent way to improve the appearance of your vehicle. From the factory, most vehicles come with halogen bulbs, which project in a yellowish light. By replacing them with LEDs, you can create a modern appearance with the cool white light of LEDs.\u003c\/p\u003e\n\u003cp\u003eThe installation is 100% plug-and-play, just replace your factory bulb!\u003c\/p\u003e\n\u003cp\u003ePlease note: Fog Light LEDs are primarily for cosmetic upgrade. Some models may not provide an increase in output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cem\u003eBULB DESIGN\u003c\/em\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eXML2: \u003c\/strong\u003eTwo opposing genuine CREE XM-L2 chips, driven at high power by self-contained regulator unit, in an attractive cast-aluminum housing. Fully waterproof, non-polar, modular design. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment. \u003c\/strong\u003eSMD, HP, and XP bulbs use an inject-molded terminal, with a full-size base connector, designed for exact replacement of your factory bulb. The XML2 bulb fits in the same way, but also requires an additional 2\" of clearance behind the bulb socket- see pictures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in your order is TWO BULBS.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cem\u003eCOLOR\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThese LEDs illuminate in a crisp, bright, \u003cstrong\u003ecool white\u003c\/strong\u003e hue. The XML2 is also available in \u003cstrong\u003enatural white, pure white, and yellow.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cem\u003eBRIGHTNESS\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eDiode Dynamics offers several brightness options so you can choose what fits you best. These options are listed by the design and the lumen output of each bulb, compared to the factory bulb.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXML2: 1410 lumens.\u003c\/strong\u003e Much brighter than factory. These are bright!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLumens: BUYER BEWARE!\u003c\/strong\u003e Most sellers just provide \"calculated\" lumen numbers, based on the maximum potential brightness of the LED chips on the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is not accurate, as the design of an LED bulb does not get rid of heat fast enough to run the LEDs at maximum. \u003c\/p\u003e\n\u003cp\u003eThese \"calculated\" lumen ratings are much, much higher than the true, measured light output, so it will look like competitors' bulbs are brighter than ours. This is because Diode Dynamics does not provide inflated \"calculated\" numbers; we believe it is misleading. We test the actual brightness of the bulbs in our lab, to provide real lumen output measurements. Our measurements are accurate, but they are usually much lower than the misleading \"calculated\" figures. Please \u003ca href=\"http:\/\/www.diodedynamics.com\/store\/research\/research-led\/led-brightness.html\" target=\"_blank\"\u003eclick here\u003c\/a\u003e to learn more about LED brightness measurement.\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":28544408786,"sku":null,"price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/diode-dynamics-fog-light-leds-for-2015-2016-subaru-wrx-pair-panda-motorworks-5142177.jpg?v=1770922209"},{"product_id":"gift-card","title":"Panda Motorworks Gift Card","description":"\u003cp data-start=\"31\" data-end=\"212\"\u003eNot sure what to buy for the performance enthusiast in your life? A Panda Motorworks Gift Card takes all the guesswork out of gifting and guarantees they get exactly what they want.\u003c\/p\u003e\n\u003cp data-start=\"214\" data-end=\"574\"\u003eWhether they’re building a street setup, upgrading key components, or shopping for their next round of mods, this gift card gives them the freedom to choose the parts that fit their goals. Gift cards are delivered by email and include simple instructions for redemption at checkout, making it a fast, easy gift that never arrives late and never needs shipping.\u003c\/p\u003e\n\u003cp data-start=\"576\" data-end=\"641\"\u003eNo processing fees. No hassle. Just pure Panda Motorworks choice.\u003c\/p\u003e","brand":"Panda Motorworks","offers":[{"title":"$10.00","offer_id":5982257217563,"sku":"","price":10.0,"currency_code":"USD","in_stock":true},{"title":"$15.00","offer_id":46801637867771,"sku":"","price":15.0,"currency_code":"USD","in_stock":true},{"title":"$20.00","offer_id":37244327526562,"sku":"","price":20.0,"currency_code":"USD","in_stock":true},{"title":"$25.00","offer_id":5982257250331,"sku":"","price":25.0,"currency_code":"USD","in_stock":true},{"title":"$30.00","offer_id":45377767211259,"sku":"","price":30.0,"currency_code":"USD","in_stock":true},{"title":"$35.00","offer_id":45377768161531,"sku":"","price":35.0,"currency_code":"USD","in_stock":true},{"title":"$50.00","offer_id":5982257283099,"sku":"","price":50.0,"currency_code":"USD","in_stock":true},{"title":"$75.00","offer_id":45337374949627,"sku":"","price":75.0,"currency_code":"USD","in_stock":true},{"title":"$100.00","offer_id":5982257315867,"sku":"","price":100.0,"currency_code":"USD","in_stock":true},{"title":"$500.00","offer_id":32157944414298,"sku":"","price":500.0,"currency_code":"USD","in_stock":true},{"title":"$1000.00","offer_id":46389833203963,"sku":"","price":1000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/panda-motorworks-panda-motorworks-gift-card-panda-motorworks-4725105.jpg?v=1770922035"},{"product_id":"2015-2017-subaru-wrx-sti-sae-dot-led-lightbar-kit","title":"2015-2017 Subaru WRX\/STi SAE\/DOT LED Lightbar Kit","description":"\u003cp data-start=\"767\" data-end=\"1305\"\u003eGive your 2015–2017 Subaru WRX\/STI a serious lighting upgrade with the Diode Dynamics Stage Series SS6 LED Lightbar Kit — a purpose-built grille-mount system designed for real performance, clean fitment, and unmatched optical precision. Using CAD-designed, heavy-duty brackets that bolt directly to factory mounting points, this kit allows you to install a pair of 6\" light bars behind the upper grille with zero cutting or drilling. The result is a stealthy, OEM-plus appearance with significantly more usable light on the road or track.\u003c\/p\u003e\n\u003cp data-start=\"1307\" data-end=\"1744\"\u003eAt the heart of the kit are Diode Dynamics’ patented TIR (Total Internal Reflection) optics, engineered to capture and focus nearly every lumen. Whether you choose SAE Fog or SAE Driving, each beam pattern is optimized for real-world functionality—wide, controlled fog performance or long-range driving output without unnecessary glare. Every bar also includes a true amber backlight for a unique accent when parked or cruising at night.\u003c\/p\u003e\n\u003cp data-start=\"1746\" data-end=\"2047\"\u003eAvailable in \u003cstrong data-start=\"1759\" data-end=\"1782\"\u003eSport, Pro, and Max\u003c\/strong\u003e power levels, each version uses premium automotive-grade LEDs for serious punch, with the Max models delivering extreme intensity using Osram HX Boost emitters. Choose a crisp 6000K white for maximum clarity or a 3000K selective yellow to cut through poor weather.\u003c\/p\u003e\n\u003cp data-start=\"2049\" data-end=\"2304\"\u003eBacked by extensive thermal, vibration, moisture, and environmental testing, the Stage Series lineup is built for endurance. And with Diode Dynamics’ US-based engineering and manufacturing, you get proven performance and a lifetime warranty you can trust.\u003c\/p\u003e\n\u003cp data-start=\"2306\" data-end=\"2438\"\u003eIf you want a lighting solution that installs easily, looks factory, and outperforms anything else in its class — this kit delivers.\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Sport (31.5 watts) \/ White SAE\/DOT Driving","offer_id":47724983025915,"sku":"DD8849","price":349.95,"currency_code":"USD","in_stock":true},{"title":"Sport (31.5 watts) \/ Yellow SAE\/DOT Driving","offer_id":47724983058683,"sku":"DD8851","price":349.95,"currency_code":"USD","in_stock":true},{"title":"Sport (31.5 watts) \/ White SAE Fog\/Wide","offer_id":47724983091451,"sku":"DD8850","price":349.95,"currency_code":"USD","in_stock":true},{"title":"Sport (31.5 watts) \/ Yellow SAE Fog\/Wide","offer_id":47724983124219,"sku":"DD8852","price":349.95,"currency_code":"USD","in_stock":true},{"title":"Pro (35 watts) \/ White SAE\/DOT Driving","offer_id":47724983156987,"sku":"DD8589","price":499.95,"currency_code":"USD","in_stock":true},{"title":"Pro (35 watts) \/ Yellow SAE\/DOT Driving","offer_id":47724983189755,"sku":"DD8591","price":499.95,"currency_code":"USD","in_stock":true},{"title":"Pro (35 watts) \/ White SAE Fog\/Wide","offer_id":47724983222523,"sku":"DD8590","price":499.95,"currency_code":"USD","in_stock":true},{"title":"Pro (35 watts) \/ Yellow SAE Fog\/Wide","offer_id":47724983255291,"sku":"DD8592","price":499.95,"currency_code":"USD","in_stock":true},{"title":"Max (40.5 watts) \/ White SAE\/DOT Driving","offer_id":47724983288059,"sku":"DD8593","price":649.95,"currency_code":"USD","in_stock":true},{"title":"Max (40.5 watts) \/ Yellow SAE\/DOT Driving","offer_id":47724983320827,"sku":"DD8595","price":649.95,"currency_code":"USD","in_stock":true},{"title":"Max (40.5 watts) \/ White SAE Fog\/Wide","offer_id":47724983353595,"sku":"DD8594","price":649.95,"currency_code":"USD","in_stock":true},{"title":"Max (40.5 watts) \/ Yellow SAE Fog\/Wide","offer_id":47724983386363,"sku":"DD8592","price":649.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/files\/diode-dynamics-2015-2017-subaru-wrxsti-saedot-led-lightbar-kit-dd8850-panda-motorworks-1445635.jpg?v=1770915735"}],"url":"https:\/\/www.pandamotorworks.com\/collections\/wrx-sti-lighting.oembed","provider":"Panda Motorworks","version":"1.0","type":"link"}