{"title":"Radium Engineering","description":"","products":[{"product_id":"radium-engineering-pcv-catch-can-kit-focus-st-rs","title":"Radium Engineering PCV CATCH CAN KIT - FOCUS ST\/RS","description":"\u003cp data-start=\"396\" data-end=\"836\"\u003eKeep your \u003cstrong data-start=\"406\" data-end=\"428\"\u003e2013-2018 Focus ST\u003c\/strong\u003e or \u003cstrong data-start=\"432\" data-end=\"454\"\u003e2016-2018 Focus RS\u003c\/strong\u003e running at peak performance with the \u003cstrong data-start=\"492\" data-end=\"532\"\u003eRadium Engineering Oil Catch Can Kit\u003c\/strong\u003e. High-performance driving causes excessive crankcase blow-by, sending oil-saturated vapors back into the intake, leading to carbon buildup and reduced efficiency. This kit traps oil and contaminants before they reach critical components, ensuring cleaner air, better reliability, and consistent power.\u003c\/p\u003e\n\u003cp data-start=\"838\" data-end=\"1182\"\u003eEach Radium catch can features \u003cstrong data-start=\"869\" data-end=\"893\"\u003elarge 10AN ORB ports\u003c\/strong\u003e, a \u003cstrong data-start=\"897\" data-end=\"919\"\u003e4AN ORB drain port\u003c\/strong\u003e, \u003cstrong data-start=\"921\" data-end=\"952\"\u003etwo-stage internal baffling\u003c\/strong\u003e, and an \u003cstrong data-start=\"961\" data-end=\"987\"\u003eO-ring sealed dipstick\u003c\/strong\u003e for easy monitoring. With a \u003cstrong data-start=\"1016\" data-end=\"1032\"\u003e7oz capacity\u003c\/strong\u003e, the system is designed as a \u003cstrong data-start=\"1062\" data-end=\"1091\"\u003esealed, closed-loop setup\u003c\/strong\u003e—making it emissions-compliant, track-legal, and ideal for boosted EcoBoost applications.\u003c\/p\u003e\n\u003cp data-start=\"1184\" data-end=\"1386\"\u003eThe catch can mounts to the \u003cstrong data-start=\"1212\" data-end=\"1252\"\u003efactory core support using OEM holes\u003c\/strong\u003e, requiring no cutting or drilling. For Focus ST models, installation requires a \u003cstrong data-start=\"1333\" data-end=\"1362\"\u003esound symposer delete kit\u003c\/strong\u003e for proper clearance.\u003cbr\u003e\u003cbr\u003eBy preventing oil buildup in the intake, throttle body, and intercooler, this kit not only \u003cstrong data-start=\"1794\" data-end=\"1818\"\u003eprotects your engine\u003c\/strong\u003e but also helps raise effective octane, reduce hydrocarbon emissions, and improve overall drivability.\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-start=\"1388\" data-end=\"1455\"\u003eFor added customization, Radium offers several optional upgrades:\u003c\/p\u003e\n\u003cul data-start=\"1456\" data-end=\"1701\"\u003e\n\u003cli data-start=\"1456\" data-end=\"1528\"\u003e\n\u003cp data-start=\"1458\" data-end=\"1528\"\u003e\u003cstrong data-start=\"1458\" data-end=\"1482\"\u003eDrain Kit (20-0024):\u003c\/strong\u003e Simplifies maintenance with quick draining.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1529\" data-end=\"1599\"\u003e\n\u003cp data-start=\"1531\" data-end=\"1599\"\u003e\u003cstrong data-start=\"1531\" data-end=\"1561\"\u003eBaffle Plate (20-0327-01):\u003c\/strong\u003e Enhances oil separation efficiency.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1600\" data-end=\"1701\"\u003e\n\u003cp data-start=\"1602\" data-end=\"1701\"\u003e\u003cstrong data-start=\"1602\" data-end=\"1632\"\u003eSymposer Delete (20-0356):\u003c\/strong\u003e Required for \u003cstrong\u003eFocus ST\u003c\/strong\u003e clearance, and cleans up engine bay airflow.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Yes +($47.45) \/ Yes +(142.45) \/ Yes +($28.45)","offer_id":47565196165371,"sku":"rad20-0315-FL \/ rad20-0356 \/ rad20-0024 \/ rad20-0327-01","price":455.8,"currency_code":"USD","in_stock":true},{"title":"Yes +($47.45) \/ Yes +(142.45) \/ No","offer_id":47565196230907,"sku":"rad20-0315-FL \/ rad20-0356 \/ rad20-0327-01","price":427.35,"currency_code":"USD","in_stock":true},{"title":"Yes +($47.45) \/ No \/ Yes +($28.45)","offer_id":47565230211323,"sku":"rad20-0315-FL \/ rad20-0356 \/ rad20-0024","price":313.24,"currency_code":"USD","in_stock":true},{"title":"Yes +($47.45) \/ No \/ No","offer_id":47565230276859,"sku":"rad20-0315-FL \/ rad20-0356","price":284.9,"currency_code":"USD","in_stock":true},{"title":"No \/ Yes +(142.45) \/ Yes +($28.45)","offer_id":47565196198139,"sku":"rad20-0315-FL \/ rad20-0024 \/ rad20-0327-01","price":408.35,"currency_code":"USD","in_stock":true},{"title":"No \/ Yes +(142.45) \/ No","offer_id":47565196263675,"sku":"rad20-0315-FL \/ rad20-0327-01","price":379.9,"currency_code":"USD","in_stock":true},{"title":"No \/ No \/ Yes +($28.45)","offer_id":47565230244091,"sku":"rad20-0315-FL \/ rad20-0024","price":265.9,"currency_code":"USD","in_stock":true},{"title":"No \/ No \/ No","offer_id":47565230309627,"sku":"rad20-0315-FL","price":237.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/files\/radium-engineering-radium-engineering-pcv-catch-can-kit-focus-strs-rad20-0315-fl-rad20-0356-rad20-0024-rad20-0327-01-panda-motorworks-5355443.webp?v=1770922091"},{"product_id":"radium-engineering-2013-ford-focus-pcv-baffle-plate-oem-configuration","title":"Radium Engineering 2013+ Ford Focus PCV Baffle Plate OEM Configuration","description":"\u003cp\u003eThe OEM configuration kit includes all parts necessary for a plug and play installation and can be used with the OEM PCV tubing or with aftermarket catch cans. Because the OEM Ford PCV valve leaks at all boost levels, this kit includes Radium's own 10AN ORB PCV Valve which prevents boost from leaking into the crankcase. No permanent vehicle modifications are required.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/lkesV0IM2iY\" frameborder=\"0\" allow=\"autoplay; encrypted-media\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":39868322450,"sku":"rad20-0327-01","price":142.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/files\/radium-engineering-radium-engineering-2013-ford-focus-pcv-baffle-plate-oem-configuration-rad20-0327-01-panda-motorworks-2605637.jpg?v=1770922090"},{"product_id":"fuel-filter-kit-2016-focus-rs","title":"Radium Engineering Fuel Filter Kit, 2016+ Focus RS","description":"\u003cp\u003eThis kit is for the 2016+ Ford Focus RS. It is designed to replace the OEM fuel filter which is plumbed between the electric and mechanical fuel pump. The Radium kit installs in minutes. No cutting or drilling is required. A couple of wrenches is all that is needed. \u003cbr\u003e\u003cimg alt=\"\" src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/RadiumProd-1927.jpg?w=600\u0026amp;h=400\u0026amp;mode=crop\"\u003e\u003cbr\u003eBecause the Radium filter is less restrictive than the OEM Ford filter, there is less stress put on the fuel pump (3-5.5psi less). Lower pre filter pressures will permit less current draw and thus less fuel temperature. Furthermore, this phenomenon permits an increase in fuel flow. The red marks below represent one aftermarket pump and the purple marks denote 2 aftermarket pumps. Note that there is a 2% and 4.5% flow increase, respectively.\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/FORD_Fuel_Filter_Test.png?ts=015719\"\u003e\u003cbr\u003eDepending on the element chosen, the filter can withstand alternate fuels such as methanol, ethanol, E85, etc. For more information, go \u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Filter-Elements-P851.aspx\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded\u003c\/strong\u003e\u003cbr\u003e-Billet Aluminum Fuel Filter (selectable element)\u003cbr\u003e-Billet Aluminum 2-Piece Clamp\u003cbr\u003e-Billet Aluminum SAE Male Fittings\u003cbr\u003e-Aluminum Mounting Bracket \u003cbr\u003e-Stainless Steel Hardware\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable cellspacing=\"0\" cellpadding=\"0\" summary=\"Description\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"descr\"\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/data.radiumauto.com\/PublicDocs\/19-0156.PDF\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eClick here to download the installation instructions (PDF).\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Radium Engineering","offers":[{"title":"Microglass-6 Micron","offer_id":1310466998299,"sku":"rad20-0332-05","price":185.2,"currency_code":"USD","in_stock":true},{"title":"Stainless-10 Micron","offer_id":1310467031067,"sku":"rad20-0332-03","price":204.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/radium-engineering-radium-engineering-fuel-filter-kit-2016-focus-rs-rad20-0332-05-panda-motorworks-3378901.jpg?v=1770922089"},{"product_id":"radium-engineering-focus-rs-cankcase-catch-can-kit-fits-2016-2018","title":"Radium Engineering Focus RS Cankcase Catch Can Kit (Fits 2016 ‑ 2018) Fluid Lock","description":"\u003cp\u003eAn oil catch can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow-by accumulated from high-performance driving. Excess oil-saturated air circulating back into the air intake stream can lead to degraded performance.\u003cbr\u003e\u003cstrong\u003e\u003cspan\u003e\u003cbr\u003eFocus EcoBoost Catch Can Kit Details\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eRadium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick. These kits mount using factory holes and integrate perfectly with the surrounding components. They do NOT vent to atmosphere (VTA), thus are emissions and track legal. Closed-loop systems remove the oil and sludge from the PCV gasses before it is routed to the engine to be burned. A closed loop system also promotes negative crankcase pressure for optimal performance. Furthermore, closed systems prevent unwanted oil vapors from entering the cabin. The dipsticks built into the catch cans allow easy inspection of accumulated fluid. No cutting, drilling or permanent modification to the vehicle is required.\u003c\/span\u003e.\u003cbr\u003e\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003eThese catch can kits mount on the back LH side of the engine bay.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis catch can runs inline with the crankcase breather port. At low loads it experiences atmospheric pressure, but when the engine is at high load (WOT), this hose will experience high flow out of the crankcase. This would normally lead to oil and sludge accumulation in the air filter intake pipe. Oil accumulation will occur in the intercooler which lowers the thermal efficiency properties of the heat exchanger and leads to decreased performance. \u003cbr\u003e\u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAll Radium catch cans provide the following benefits:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e-Effectively raises the octane and increased engine performance from cleaner inlet air \u003cbr data-mce-fragment=\"1\"\u003e-Prevents oil buildup in the intake and intercooler system walls, throttle body, intake manifold, etc. \u003cbr data-mce-fragment=\"1\"\u003e-Excessive oil collection can be an indicator of a damaged engine.\u003cbr data-mce-fragment=\"1\"\u003e-Lowers hydrocarbon emissions \u003cbr data-mce-fragment=\"1\"\u003e-Capacity: 7 fluid ounces each\u003cbr\u003e\u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eEach kit includes the following:\u003c\/strong\u003e \u003cbr data-mce-fragment=\"1\"\u003e-Anodized oil catch can with integrated condenser and dipstick\u003cbr data-mce-fragment=\"1\"\u003e-Anodized laser cut Focus specific mounting bracket\u003cbr data-mce-fragment=\"1\"\u003e-Anodized aluminum -AN adapter fittings and hose ends\u003cbr data-mce-fragment=\"1\"\u003e-Enough PCV hose for custom applications  \u003cbr data-mce-fragment=\"1\"\u003e-Stainless steel mounting hardware \u003cbr\u003e\u003cbr\u003eWe also recommend the Remote Drain Valve Kit Available here. \u003ca href=\"https:\/\/www.pandamotorworks.com\/products\/catch-can-petcock-drain-kit\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.pandamotorworks.com\/products\/catch-can-petcock-drain-kit\"\u003ehttps:\/\/www.pandamotorworks.com\/products\/catch-can-petcock-drain-kit\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/lkesV0IM2iY\" frameborder=\"0\" allow=\"autoplay; encrypted-media\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":3511861739547,"sku":"rad20-0316-FL","price":227.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/radium-engineering-radium-engineering-focus-rs-cankcase-catch-can-kit-fits-2016-2018-fluid-lock-rad20-0316-fl-panda-motorworks-5230998.jpg?v=1770922088"},{"product_id":"radium-engineering-dual-catch-can-kit-2013-focus-st-rs","title":"Radium Engineering Dual Catch Can Kit, 2013+ Focus ST\/RS Fluid Lock","description":"\u003cp data-end=\"1237\" data-start=\"822\"\u003eRadium Engineering catch cans utilize large 10AN ORB inlet and outlet ports, a 4AN ORB drain port, advanced two-step internal oil separation baffling, and an O-ring sealed dipstick for quick inspection. Both catch cans are completely sealed and operate as closed-loop systems, meaning they do not vent to the atmosphere. This makes them emissions compliant, track legal, and prevents oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp data-end=\"1584\" data-start=\"1239\"\u003eEach catch can function independently, allowing precise oil separation from both the PCV and crankcase ventilation systems. By removing oil mist, fuel vapors, and sludge before gases are recirculated into the engine, the system helps maintain cleaner intake air and promotes negative crankcase pressure for improved performance and consistency.\u003c\/p\u003e\n\u003ch4 data-end=\"1622\" data-start=\"1586\"\u003ePCV Catch Can Function \u0026amp; Fitment\u003c\/h4\u003e\n\u003cp data-end=\"2047\" data-start=\"1624\"\u003eThe PCV catch can installs inline with the factory PCV valve and retains full OEM functionality. Under idle, cruising, and deceleration conditions, the system experiences metered vacuum, which would normally draw oil vapor and contaminants directly into the intake manifold. The Radium sealed catch can safely handles boosted conditions, allowing direct manifold connection while effectively capturing harmful contaminants.\u003c\/p\u003e\n\u003cp data-end=\"2358\" data-start=\"2049\"\u003eThis PCV catch can mounts on the front left core support near the radiator and is used on both Ford Focus ST and Focus RS turbocharged EcoBoost engines. For Focus ST applications, installation requires a sound symposer delete kit, such as the Radium 20-0356, or an equivalent alternative for proper clearance.\u003c\/p\u003e\n\u003ch4 data-end=\"2396\" data-start=\"2360\"\u003eCCV Catch Can Function \u0026amp; Fitment\u003c\/h4\u003e\n\u003cp data-end=\"2873\" data-start=\"2398\"\u003eThe crankcase ventilation (CCV) catch can mounts on the rear left-hand side of the engine bay and installs inline with the crankcase breather port. During low-load operation, the system experiences near-atmospheric pressure, but under high load and wide-open throttle conditions, it manages high-volume crankcase flow. Without proper separation, this flow would introduce oil into the intake piping and intercooler, reducing thermal efficiency and overall engine performance.\u003c\/p\u003e\n\u003ch3 data-end=\"2891\" data-start=\"2875\"\u003eKey Benefits\u003c\/h3\u003e\n\u003cul data-end=\"3274\" data-start=\"2893\"\u003e\n\u003cli data-end=\"2963\" data-start=\"2893\"\u003e\n\u003cp data-end=\"2963\" data-start=\"2895\"\u003eHelps maintain effective octane levels by keeping intake air clean\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"3058\" data-start=\"2964\"\u003e\n\u003cp data-end=\"3058\" data-start=\"2966\"\u003ePrevents oil buildup in the intake piping, intercooler, throttle body, and intake manifold\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"3128\" data-start=\"3059\"\u003e\n\u003cp data-end=\"3128\" data-start=\"3061\"\u003eImproves long-term engine reliability and performance consistency\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"3206\" data-start=\"3129\"\u003e\n\u003cp data-end=\"3206\" data-start=\"3131\"\u003eExcessive oil collection can serve as an early indicator of engine issues\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"3274\" data-start=\"3207\"\u003e\n\u003cp data-end=\"3274\" data-start=\"3209\"\u003eReduces hydrocarbon emissions compared to open breather systems\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-end=\"3786\" data-start=\"3765\"\u003eOptional Upgrades\u003c\/h4\u003e\n\u003cp data-end=\"3981\" data-start=\"3788\"\u003eThis system pairs perfectly with the Radium OEM Configuration PCV Plate, available in the options. For simplified maintenance, the use of two Radium Remote Drain Valve Kits is also recommended.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"ST (ADD Radium Symposer Delete) (+$47.45) \/ One Drain Kit (+$28.45) \/ Yes (+$113.95)","offer_id":3511971086363,"sku":"rad20-0358-FL  \/ rad20-0327-02 \/ rad20-0024 \/ rad20-0356","price":645.8,"currency_code":"USD","in_stock":true},{"title":"ST (ADD Radium Symposer Delete) (+$47.45) \/ One Drain Kit (+$28.45) \/ No","offer_id":47775691014395,"sku":"rad20-0358-FL \/ rad20-0024 \/ rad20-0356","price":531.85,"currency_code":"USD","in_stock":true},{"title":"ST (ADD Radium Symposer Delete) (+$47.45) \/ Two Drain Kits (+$56.90) \/ Yes (+$113.95)","offer_id":47775691047163,"sku":"rad20-0358-FL \/ rad20-0327-02 \/ rad20-0024 (x2) \/ rad20-0356","price":674.25,"currency_code":"USD","in_stock":true},{"title":"ST (ADD Radium Symposer Delete) (+$47.45) \/ Two Drain Kits (+$56.90) \/ No","offer_id":47775691079931,"sku":"rad20-0358-FL \/ rad20-0024 (x2) \/ rad20-0356","price":560.3,"currency_code":"USD","in_stock":true},{"title":"ST (ADD Radium Symposer Delete) (+$47.45) \/ No \/ Yes (+$113.95)","offer_id":47775693930747,"sku":"rad20-0358-FL \/ rad20-0327-02 \/ rad20-0356","price":617.35,"currency_code":"USD","in_stock":true},{"title":"ST (ADD Radium Symposer Delete) (+$47.45) \/ No \/ No","offer_id":47775693963515,"sku":"rad20-0358-FL \/ rad20-0356","price":503.4,"currency_code":"USD","in_stock":true},{"title":"RS \/ One Drain Kit (+$28.45) \/ Yes (+$113.95)","offer_id":3511971119131,"sku":"rad20-0328-FL \/ rad20-0327-02 \/ rad20-0024 (x2)","price":598.35,"currency_code":"USD","in_stock":true},{"title":"RS \/ One Drain Kit (+$28.45) \/ No","offer_id":47775691112699,"sku":"rad20-0328-FL \/ rad20-0024","price":484.4,"currency_code":"USD","in_stock":true},{"title":"RS \/ Two Drain Kits (+$56.90) \/ Yes (+$113.95)","offer_id":47775691145467,"sku":"rad20-0328-FL \/ rad20-0327-02 \/ rad20-0024 (x2)","price":626.8,"currency_code":"USD","in_stock":true},{"title":"RS \/ Two Drain Kits (+$56.90) \/ No","offer_id":47775691178235,"sku":"rad20-0328-FL \/ rad20-0024 (x2)","price":512.85,"currency_code":"USD","in_stock":true},{"title":"RS \/ No \/ Yes (+$113.95)","offer_id":47775693996283,"sku":"rad20-0328-FL \/ rad20-0327-02","price":569.9,"currency_code":"USD","in_stock":true},{"title":"RS \/ No \/ No","offer_id":47775694029051,"sku":"rad20-0328-FL","price":455.95,"currency_code":"USD","in_stock":true},{"title":"ST (Already Have Symposer Delete) \/ One Drain Kit (+$28.45) \/ Yes (+$113.95)","offer_id":47775691211003,"sku":"rad20-0358-FL \/ rad20-0327-02 \/ rad20-0024","price":598.35,"currency_code":"USD","in_stock":true},{"title":"ST (Already Have Symposer Delete) \/ One Drain Kit (+$28.45) \/ No","offer_id":47775691243771,"sku":"rad20-0358-FL \/ rad20-0024","price":484.4,"currency_code":"USD","in_stock":true},{"title":"ST (Already Have Symposer Delete) \/ Two Drain Kits (+$56.90) \/ Yes (+$113.95)","offer_id":47775691276539,"sku":"rad20-0358-FL \/ rad20-0327-02 \/ rad20-0024 (x2)","price":626.8,"currency_code":"USD","in_stock":true},{"title":"ST (Already Have Symposer Delete) \/ Two Drain Kits (+$56.90) \/ No","offer_id":47775691309307,"sku":"rad20-0358-FL \/ rad20-0024 (x2)","price":512.85,"currency_code":"USD","in_stock":true},{"title":"ST (Already Have Symposer Delete) \/ No \/ Yes (+$113.95)","offer_id":47775694061819,"sku":"rad20-0358-FL \/ rad20-0327-02","price":569.9,"currency_code":"USD","in_stock":true},{"title":"ST (Already Have Symposer Delete) \/ No \/ No","offer_id":47775694094587,"sku":"rad20-0358-FL","price":455.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/radium-engineering-radium-engineering-dual-catch-can-kit-2013-focus-strs-fluid-lock-rad20-0358-fl-rad20-0327-02-rad20-0024-rad20-0356-panda-motorworks-7873578.jpg?v=1770922089"},{"product_id":"radium-engineering-sound-symposer-delete-kit-2013-focus-st","title":"Radium Engineering Sound Symposer Delete Kit, 2013+ Focus ST","description":"\u003cspan\u003e\u003cstrong\u003eIncluded\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e-Billet Aluminum Block-Off Plate\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e-Billet Aluminum 1\/8\" NPT Elbow Fitting\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e-Billet Aluminum 1\/8\" NPT Plug\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e-Plastic Panel Locking Plug\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e-Stainless Steel Hardware\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e-Cable Zip Tie\u003c\/span\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":3511986356251,"sku":"rad20-0356","price":47.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/radium-engineering-radium-engineering-sound-symposer-delete-kit-2013-focus-st-rad20-0356-panda-motorworks-2921880.jpg?v=1770922087"},{"product_id":"fuel-surge-tank-install-kit-focus-ecoboost","title":"Radium Engineering Fuel Surge Tank Complete Kit, Focus EcoBoost","description":"\u003cp data-start=\"484\" data-end=\"908\"\u003eThe \u003cstrong data-start=\"488\" data-end=\"548\"\u003eRadium Engineering Fuel Surge Tank (FSTR-RA) Install Kit\u003c\/strong\u003e is the ultimate solution for safely and cleanly installing a surge tank system in your \u003cstrong data-start=\"636\" data-end=\"659\"\u003e2013+ Ford Focus ST\u003c\/strong\u003e or \u003cstrong data-start=\"663\" data-end=\"681\"\u003e2015+ Focus RS\u003c\/strong\u003e. Designed to protect your engine from fuel starvation during spirited driving, this kit allows the \u003cstrong data-start=\"781\" data-end=\"792\"\u003eFSTR-RA\u003c\/strong\u003e to feed the high-pressure fuel pump (HPFP) while using the factory low-pressure pump to keep the surge tank filled.\u003c\/p\u003e\n\u003cp data-start=\"910\" data-end=\"1261\"\u003eIncluded is a \u003cstrong data-start=\"924\" data-end=\"968\"\u003eblack anodized aluminum mounting bracket\u003c\/strong\u003e that positions the FST in a \u003cstrong data-start=\"997\" data-end=\"1044\"\u003ecollision-safe location beneath the vehicle\u003c\/strong\u003e, just in front of the rear bumper support. The bracket bolts directly to OEM points, making for a secure and clean install. The provided \u003cstrong data-start=\"1182\" data-end=\"1206\"\u003eheat-reflective tape\u003c\/strong\u003e helps protect the surge tank system from exhaust heat.\u003c\/p\u003e\n\u003cp data-start=\"1263\" data-end=\"1570\"\u003eThis kit includes everything necessary to complete the install: \u003cstrong data-start=\"1327\" data-end=\"1357\"\u003e-6AN Vapor Shield EFI hose\u003c\/strong\u003e, AN and OEM-style fittings, \u003cstrong data-start=\"1386\" data-end=\"1417\"\u003ealuminum push-lok hose ends\u003c\/strong\u003e, and a full \u003cstrong data-start=\"1430\" data-end=\"1444\"\u003ewiring kit\u003c\/strong\u003e featuring a weatherproof relay and fuse, along with \u003cstrong data-start=\"1497\" data-end=\"1532\"\u003eRaychem solderless butt splices\u003c\/strong\u003e for a fast, solder-free installation.\u003c\/p\u003e\n\u003cp data-start=\"1572\" data-end=\"1842\"\u003eThe \u003cstrong data-start=\"1576\" data-end=\"1634\"\u003eFSTR-RA features an integrated fuel pressure regulator\u003c\/strong\u003e that can be run static to mimic the stock system or vacuum-referenced for 1:1 fuel pressure adjustment. Fuel overflow returns to the tank via a \u003cstrong data-start=\"1779\" data-end=\"1814\"\u003ebillet fuel filler hose adapter\u003c\/strong\u003e for seamless reintegration.\u003c\/p\u003e\n\u003cp data-start=\"1844\" data-end=\"1975\"\u003e\u003cstrong data-start=\"1844\" data-end=\"1884\"\u003eFuel pump required, sold separately.\u003c\/strong\u003e Compatible options include the \u003cstrong data-start=\"1916\" data-end=\"1931\"\u003eAEM 50-1000\u003c\/strong\u003e, \u003cstrong data-start=\"1933\" data-end=\"1948\"\u003eAEM 50-1200\u003c\/strong\u003e, and \u003cstrong data-start=\"1954\" data-end=\"1974\"\u003eWalbro F90000285\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Yes \/ Walbro F90000285","offer_id":45140503822587,"sku":"rad20-0365 \/ rad20-0152 \/ rad20-1933 \/ walF90000285","price":1127.99,"currency_code":"USD","in_stock":true},{"title":"Yes \/ AEM 50-1000","offer_id":45140503855355,"sku":"rad20-0365 \/ rad20-0152 \/ rad20-1933 \/ aem50-1000","price":1093.99,"currency_code":"USD","in_stock":true},{"title":"Yes \/ AEM 50-1200","offer_id":45140503888123,"sku":"rad20-0365 \/ rad20-0152 \/ rad20-1933 \/ aem50-1200","price":1123.99,"currency_code":"USD","in_stock":true},{"title":"Yes \/ Walbro\/T1 BKS1001-4 Brushless","offer_id":45273648267515,"sku":"rad20-0365 \/ rad20-0152 \/ rad20-1933 \/ walBKS1001-4","price":1765.99,"currency_code":"USD","in_stock":true},{"title":"No \/ Walbro F90000285","offer_id":45140541276411,"sku":"rad20-0365 \/ rad20-1933 \/ walF90000285","price":1066.99,"currency_code":"USD","in_stock":true},{"title":"No \/ AEM 50-1000","offer_id":45140541309179,"sku":"rad20-0365 \/ rad20-1933 \/ aem50-1000","price":1032.99,"currency_code":"USD","in_stock":true},{"title":"No \/ AEM 50-1200","offer_id":45140541341947,"sku":"rad20-0365 \/ rad20-1933 \/ aem50-1200","price":1071.99,"currency_code":"USD","in_stock":true},{"title":"No \/ Walbro\/T1 BKS1001-4 Brushless","offer_id":45273648300283,"sku":"rad20-0365 \/ rad20-1933 \/ walBKS1001-4","price":1704.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/radium-engineering-radium-engineering-fuel-surge-tank-complete-kit-focus-ecoboost-rad20-0365-rad20-0152-rad20-1933-walf90000285-panda-motorworks-7333973.jpg?v=1770922037"},{"product_id":"2014-ford-fiesta-st-radium-catch-can","title":"Radium Engineering  Catch Can 2014+ Ford Fiesta ST Fluid Lock","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e2014+ Ford Fiesta ST Catch Can Kit Details:\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003eThe Radium Engineering catch cans are the most functional and integrated kits on the market. The catch cans mount using factory holes and integrate perfectly with the surrounding components. These two oil catch cans (PCV side and Crankcase side) function completely independent of each other and are sold individually or together. They do NOT vent to atmosphere (VTA), thus are emissions and track legal. Closed loop systems remove the oil and sludge from the PCV gasses before it is routed to the engine to be burned. A closed loop system also promotes negative crankcase pressure for optimal performance. Furthermore, closed systems prevent unwanted oil vapors from entering the cabin. The dipsticks built into the catch cans allow easy inspection of accumulated fluid. No cutting, drilling or permanent modification to the vehicle is required.\u003cbr\u003e\u003cbr\u003eThe\u003cspan\u003e \u003cstrong\u003e20-0377 PCV Catch Can K\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eit, Fiesta ST\u003c\/strong\u003e\u003c\/span\u003e secures to the front RH motor mount and the entire kit fits under the OEM engine cover with no modifications required.\u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/prod_pic-3702.jpg\" alt=\"\"\u003e\u003cbr\u003eThis catch can runs inline with the PCV (positive crankcase ventilation) valve and retains it's factory function. When the intake manifold pressure is close to or greater than atmospheric pressure, the PCV \"check\" valve closes and, thus, this hose experiences no flow. Conversely, the PCV hose will experience \"metered\" vacuum when the engine is idling, steady state cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run. Note: Because the Radium catch cans are pressure sealed, they are great for this boosted application so intake manifold connection is permitted.\u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0377.jpg\" alt=\"\"\u003e\u003cbr\u003eThe \u003cspan\u003e\u003cstrong\u003e20-0378 Crankcase Catch Can Kit, Fiesta ST\u003c\/strong\u003e\u003c\/span\u003e secures to the 2 ECU mounting studs in the back LH side of the engine bay and the entire kit fits under the OEM engine cover with no modifications required.\u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/prod_pic-3699.jpg\" alt=\"\"\u003e\u003cbr\u003eThis catch can runs inline with the crankcase vent port. At low loads it experiences atmospheric pressure, but when the engine is at high load (WOT), this hose will experience high flow out of the crankcase. This would normally lead to oil and sludge accumulation in the air filter intake pipe. Oil accumulation will occur in the intercooler which lowers the thermal efficiency properties of the heat exchanger and leads to decreased performance.\u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0378.jpg\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEach kit features the following:\u003c\/strong\u003e \u003cbr\u003e-Anodized oil catch can with integrated condenser and dipstick\u003cbr\u003e-Anodized aluminum Fiesta specific mounting bracket\u003cbr\u003e-Anodized aluminum -AN adapter fittings and hose ends\u003cbr\u003e-Enough PCV hose for custom applications  \u003cbr\u003e-Stainless steel mounting hardware \u003c\/p\u003e\n\u003cp\u003eFor the ultimate in engine protection, Radium recommends a \u003cspan\u003e\u003cstrong\u003eDual Catch Can Kit.\u003c\/strong\u003e \u003c\/span\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWe also recommend the Remote Drain Valve (Kit or Kits) if you have dual cans available here. h\u003ca href=\"https:\/\/www.pandamotorworks.com\/products\/catch-can-petcock-drain-kit\"\u003ettps:\/\/www.pandamotorworks.com\/products\/catch-can-petcock-drain-kit\u003c\/a\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/prod_pic-3716.jpg\" alt=\"\"\u003e\u003cbr\u003eThis kit utilizes both the \u003cstrong\u003e\"Crankcase\"\u003c\/strong\u003e and \u003cstrong\u003e\"PCV\"\u003c\/strong\u003e catch can kits.\u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0379.jpg\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/data.radiumauto.com\/PublicDocs\/19-0175B.PDF\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eClick here to download installation instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"PCV","offer_id":6468821549083,"sku":"rad20-0377-FL","price":208.95,"currency_code":"USD","in_stock":true},{"title":"Crank Case","offer_id":6468821581851,"sku":"rad20-0378-FL","price":208.95,"currency_code":"USD","in_stock":true},{"title":"Dual Catch Can Kit","offer_id":6468821614619,"sku":"rad20-0379-FL","price":408.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/radium-engineering-radium-engineering-catch-can-2014-ford-fiesta-st-fluid-lock-rad20-0377-fl-panda-motorworks-4750945.jpg?v=1770922033"},{"product_id":"catch-can-kit-crankcase-2013-focus-st","title":"Radium Engineering Catch Can Kit, Crankcase, 2013+ Focus ST Fluid lock","description":"\u003cp\u003e\u003cspan\u003eAn oil catch can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow-by accumulated from high performance driving. Excess oil saturated air circulating back into the air intake stream can lead to degraded performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan\u003eFocus EcoBoost Catch Can Kit Details\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eRadium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick. These kits mount using factory holes and integrate perfectly with the surrounding components. These two oil catch cans (PCV  and CCV) function completely independent of each other and are sold individually or together. They do NOT vent to atmosphere (VTA), thus are emissions and track legal. Closed loop systems remove the oil and sludge from the PCV gasses before it is routed to the engine to be burned. A closed loop system also promotes negative crankcase pressure for optimal performance. Furthermore, closed systems prevent unwanted oil vapors from entering the cabin. The dipsticks built into the catch cans allow easy inspection of accumulated fluid. No cutting, drilling or permanent modification to the vehicle is required.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eThese catch can kits mount on the back LH side of the engine bay.\u003cbr\u003e\u003cbr\u003eThis catch can runs inline with the crankcase breather port. At low loads it experiences atmospheric pressure, but when the engine is at high load (WOT), this hose will experience high flow out of the crankcase. This would normally lead to oil and sludge accumulation in the air filter intake pipe. Oil accumulation will occur in the intercooler which lowers the thermal efficiency properties of the heat exchanger and leads to decreased performance.\u003cbr\u003e\u003cstrong\u003e\u003cem\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0357-FL.jpg?ts=064352\" alt=\"\" width=\"600\" height=\"400\"\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEach kit includes the following:\u003c\/strong\u003e \u003cbr\u003e-Anodized oil catch can with integrated condenser and dipstick\u003cbr\u003e-Anodized laser cut Focus specific mounting bracket\u003cbr\u003e-Anodized aluminum -AN adapter fittings and hose ends\u003cbr\u003e-Enough PCV hose for custom applications  \u003cbr\u003e-Stainless steel mounting hardware \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe also recommend the Remote Drain Valve Kit Available here. \u003ca href=\"https:\/\/www.pandamotorworks.com\/products\/catch-can-petcock-drain-kit\"\u003ehttps:\/\/www.pandamotorworks.com\/products\/catch-can-petcock-drain-kit\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":13623374446682,"sku":"rad20-0357-FL","price":227.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/files\/radium-engineering-radium-engineering-catch-can-kit-crankcase-2013-focus-st-fluid-lock-rad20-0357-fl-panda-motorworks-3247417.jpg?v=1770922029"},{"product_id":"fuel-surge-tank-install-kit-ford-f150-raptor","title":"Radium Engineering Fuel Surge Tank Install Kit, Ford F150 Raptor","description":"\u003cp\u003eThis comprehensive installation kit includes everything needed to install a Radium fuel surge tank (FST-R) in a 2017+ F150 Raptor EcoBoost. The required FST-R is sold separately or in a package below, Some of the pumps available outflow the OEM Ford Raptor fuel pump by more than 23%.\u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/Raptor_Fuel_Pump_Flow-Edited.png\" alt=\"\"\u003e\u003cbr\u003eThe OEM fuel pump is repurposed to keep the surge tank full with excess returning back to the OEM fuel tank. The new FST-R pump will now feed the engine and is regulated by the integrated FPR on the surge tank. This pump keeps supplying fuel, even if the OEM fuel pump becomes momentarily starved.\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/F150_FST_Plumbing.png\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eA Radium gauge is included to adjust and monitor fuel pressure. The integrated regulator on the FST can be vacuum referenced if 1:1 fuel pressure is required or ran static (no vacuum reference) to mimic the stock system.\u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0487_Installed.jpg\" alt=\"\" width=\"600\" height=\"400\"\u003e\u003cbr\u003eThe Ford F150 Raptor install kit locates the FST-R in a collision-safe area under the LH side of the truck. The polished stainless steel bracket solidly mounts to OEM mounting points.\u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0487_Installed-2.jpg\" alt=\"\"\u003e\u003cbr\u003eAlso included are wiring components with flying leads featuring Raychem solderless butt splices, and a weatherproof fuse and relay to drive the FST-R fuel pump. Wiring is very simple and takes less than 30 minutes to assemble. No soldering is required.\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/F150_FST_Wiring_Diagram.jpg\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is Included?\u003c\/strong\u003e\u003cbr\u003e-Stainless Steel F150 FST Mount\u003cbr\u003e-Fuel Pressure Gauge\u003cbr\u003e-Aluminum Push Lok -6AN Hose Ends\u003cbr\u003e-AN and OEM Style Adapter Fittings\u003cbr\u003e-Vapor Shield 3\/8\" (-6AN) EFI Hose\u003cbr\u003e-Wiring Components with Relay and Fuse\u003cbr\u003e-Stainless Steel Hardware\u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0487.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cstrong\u003eWhat is Required?\u003c\/strong\u003e\u003cbr\u003eAn FST-R (Fuel Surge Tank-Regulated) is needed to go with this installation kit. See the options above.\u003c\/p\u003e\n\u003ch2 class=\"ui-heading\"\u003e\u003c\/h2\u003e","brand":"Radium Engineering","offers":[{"title":"None","offer_id":42985680765179,"sku":"rad20-0487","price":427.45,"currency_code":"USD","in_stock":true},{"title":"Walbro GSS342 255lph FST-R","offer_id":16039169785946,"sku":"rad20-0487 \/ 20-0133-00 \/ walGSS342G3","price":1009.99,"currency_code":"USD","in_stock":true},{"title":"AEM 50-1200 E85 FST-R","offer_id":16039169818714,"sku":"rad20-0487 \/ 20-0133-00 \/ aem50-1200","price":1059.99,"currency_code":"USD","in_stock":true},{"title":"Walbro F90000274 E85 FST-R","offer_id":16039169851482,"sku":"rad20-0487 \/ 20-0135-00 \/ wal F90000274","price":1069.99,"currency_code":"USD","in_stock":true},{"title":"Walbro F90000285  E85 FST-R","offer_id":42985690661115,"sku":"rad20-0487 \/ 20-0135-00 \/ wal F90000285","price":1099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/radium-engineering-radium-engineering-fuel-surge-tank-install-kit-ford-f150-raptor-rad20-0487-panda-motorworks-9156756.jpg?v=1770921967"},{"product_id":"catch-can-kit-pcv-ford-f150-raptor","title":"Radium Engineering Catch Can Kit, 15-20 Ford F150 and Raptor EcoBoost V6 Fluid Lock","description":"\u003cstrong\u003eThis kit is compatible with the 15-20 EcoBoost V6 powered Ford Raptor and F-150 (4WD and 2WD).\u003c\/strong\u003e\u003cbr\u003e\n\u003cp\u003eThe Radium Engineering catch cans are the most functional and integrated kits on the market. The catch cans mount using factory holes and integrate perfectly with the surrounding components. These two oil catch cans (PCV side and CCV side) function completely independent of each other and are sold individually or together. They do NOT vent to atmosphere (VTA), thus are emissions and track legal. Closed loop systems remove the oil and sludge from the PCV gasses before it is routed to the engine to be burned. A closed loop system also promotes negative crankcase pressure for optimal performance. Furthermore, closed systems prevent unwanted oil vapors from entering the cabin. The dipsticks built into the catch cans allow easy inspection of accumulated fluid. No cutting, drilling or permanent modification to the vehicle is required. \u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThe \u003cspan\u003e\u003cstrong\u003eCatch Can K\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eit, PCV, 15-20 F150 Raptor EcoBoost V6, Fluid Lock\u003c\/strong\u003e\u003c\/span\u003e secures to the firewall with no modifications required. This catch can runs inline with the PCV (positive crankcase ventilation) valve and retains it's factory function. When the intake manifold pressure is close to or greater than atmospheric pressure, the PCV \"check\" valve closes and, thus, this hose experiences no flow. Conversely, the PCV hose will experience \"metered\" vacuum when the engine is idling, steady state cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run. Note: No inline check valve is required since Radium catch cans are pressure sealed. This means a direct intake manifold connection is permitted.\u003cbr\u003e\u003cimg height=\"400\" width=\"600\" alt=\"\" src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0481-FLn.jpg\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDES\u003c\/strong\u003e \u003cbr\u003e-Anodized oil catch can with integrated condenser and dipstick\u003cbr\u003e-Anodized aluminum F150 specific mounting bracket\u003cbr\u003e-Anodized aluminum -AN adapter fittings and hose ends\u003cbr\u003e-Stainless steel mounting hardware\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Catch Can Kit PCV Ford F150 Raptor","offer_id":42985401909499,"sku":"rad20-0481-FL","price":232.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/radium-engineering-radium-engineering-catch-can-kit-15-20-ford-f150-and-raptor-ecoboost-v6-fluid-lock-rad20-0481-fl-panda-motorworks-4727128.jpg?v=1770921967"},{"product_id":"pcv-valve-10an-orb-to-3-8-barb","title":"Radium Engineering PCV Valve, 10AN ORB to 3\/8\" Barb","description":"\u003cp\u003e\u003cspan\u003eRadium PCV valve for positive crankcase ventilation systems. Can be used on the outlet of any \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Universal-Catch-Cans-AOS-C58.aspx\"\u003eRadium Engineering Catch Can\u003c\/a\u003e\u003cspan\u003e. \u003c\/span\u003e\u003cspan\u003eor any related part that uses -10AN ORB threads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003cbr\u003eOutlet: 3\/8\" Barb (9.5mm) \u003cbr\u003eInlet: 10AN ORB (7\/8-14 threads)\u003cbr\u003eSealing O-ring: FKM (Viton)\u003cbr\u003eAluminum: 6061 Type-II Anodized\u003cbr\u003eLeak Free Pressure Test: 150psi\u003c\/span\u003e\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":16397761019994,"sku":"rad20-0530","price":37.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/radium-engineering-radium-engineering-pcv-valve-10an-orb-to-38-barb-rad20-0530-panda-motorworks-6723866.jpg?v=1770921852"},{"product_id":"catch-can-petcock-drain-kit","title":"Radium Engineering Catch Can Remote Petcock Drain Kit","description":"\u003cspan\u003eThis kit can be used to remotely drain any of the Radium Engineering catch cans without the need to unscrew the canister body.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e-Anodized 4AN ORB Barbed Adapter Fitting, Black \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e-Ball Valve with 1\/4\" Barbs, 125psi @ 140F \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e-Rubber 1\/4\" PCV Hose\u003c\/span\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":17008954572890,"sku":"rad20-0024","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/radium-engineering-radium-engineering-catch-can-remote-petcock-drain-kit-rad20-0024-panda-motorworks-1371102.jpg?v=1770921847"},{"product_id":"radium-engineering-13-scion-fr-s-subaru-brz-lh-crankcase-catch-can-kit","title":"Radium Engineering 13+ Scion FR-S \/ Subaru BRZ LH Crankcase Catch Can Kit Fluid lock","description":"\u003cp\u003e\u003cspan\u003e\u003ca href=\"http:\/\/data.radiumauto.com\/PublicDocs\/19-0073D.PDF\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eClick here to download installation instructions\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAn oil catch can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow-by accumulated from aggressive driving. Excess oil-saturated air circulating back into the air intake stream can lead to degraded performance. \u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cstrong\u003eBENEFITS OF A RADIUM CATCH CAN:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e-Effectively raises the octane and increased engine performance from cleaner inlet air \u003cbr\u003e-Prevents oil buildup in the intake or intercooler system walls, throttle body, intake manifold, etc. \u003cbr\u003e-Excessive oil collection can be an indicator of a damaged engine.\u003cbr\u003e-Lowers hydrocarbon emissions \u003cbr\u003e-Capacity: 6 fluid ounces \u003cbr\u003e-Height (without fittings): 5 inches \u003cbr\u003e-Outside Diameter: 2.45 inches\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003eFR-S \/ BRZ \/ 86 MOUNTING LOCATION\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eRadium engineers have strategically located the catch cans for compatibility with both\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eRight Hand Drive (RHD)\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eLeft Hand Drive (LHD)\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\"86\" model variations. Some brake clearancing is necessary on RHD installations. Both of these kits are also\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecompatible with all current aftermarket forced induction kits.\u003c\/strong\u003e For mounting, the kits use factory bosses and holes in the vehicle. No cutting, drilling or permanent modification to the vehicle is required.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eKIT DETAILS\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eThese two oil catch can kits are completely independent of each other and are sold individually or together. They do NOT vent to atmosphere (VTA), thus are emissions and track legal. Closed loop systems route clean filtered air back in through the engine to be burned and to promote negative crankcase pressure for optimal performance. Furthermore, closed systems prevent unwanted oil vapors into the cabin. Each kit includes: \u003cbr\u003e\u003cbr\u003e-Radium billet oil catch can with integrated condenser and dipstick\u003cbr\u003e-Radium laser cut powder coated \"86\" specific mounting bracket\u003cbr\u003e-Anodized aluminum banjo bolt, -8AN hose ends, and adapter fittings\u003cbr\u003e-Enough hose to mate to custom applications  \u003cbr\u003e-Stainless steel mounting hardware\u003cbr\u003e-Installation instructions\u003c\/p\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eCrankcase Vent\u003c\/strong\u003e kit mounts on the left side of the engine bay. This catch can runs inline with the 1\/2\" breather port. At low loads it experiences atmospheric pressure, but when the engine is at high load (WOT), this hose will experience vacuum and would normally be drawing unwanted crankcase vapors, unspent fuel, and oil sludge into the air filter intake pipe. If the engine is turbocharged or supercharged and you are finding oil accumulation stuck in the intercooler, this catch can is a necessity as oil will lower the thermal efficiency properties of the heat exchange process. \u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/productDESC\/ft86_crank_kit_2.jpg\" alt=\"\"\u003e\u003cbr\u003eThe \u003cstrong\u003eBRZ\/FRS\u003c\/strong\u003e kit mounts on the right side of the engine bay. This catch can runs inline with the 3\/8\" PCV (positive crankcase ventilation) valve. When the intake manifold pressure is close to or greater than atmospheric pressure, the PCV \"check\" valve closes and, thus, this hose experiences no flow. Conversely, the PCV hose will experience \"metered\" vacuum when the engine is idling, steady state cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run. Note: Because the Radium catch cans are pressure sealed, they are great for boosted applications as well so connecting to the intake manifold is permitted.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/productDESC\/ft86_pcv_kit2.jpg\" alt=\"\"\u003e\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":17383765508186,"sku":"rad20-0902-FL","price":218.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/radium-engineering-radium-engineering-13-scion-fr-s-subaru-brz-lh-crankcase-catch-can-kit-fluid-lock-rad20-0902-fl-panda-motorworks-8564264.jpg?v=1770921791"},{"product_id":"radium-engineering-13-scion-fr-s-subaru-brz-rh-pcv-catch-can-kit","title":"Radium Engineering  Radium FR-S\/BRZ\/86 PCV Side Catch Can Kit Fluid Lock","description":"\u003cp\u003e\u003cspan\u003e\u003ca href=\"http:\/\/data.radiumauto.com\/PublicDocs\/19-0073D.PDF\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eClick here to download installation instructions\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAn oil catch can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow-by accumulated from aggressive driving. Excess oil-saturated air circulating back into the air intake stream can lead to degraded performance. \u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cstrong\u003eBENEFITS OF A RADIUM CATCH CAN:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e-Effectively raises the octane and increased engine performance from cleaner inlet air \u003cbr\u003e-Prevents oil buildup in the intake or intercooler system walls, throttle body, intake manifold, etc. \u003cbr\u003e-Excessive oil collection can be an indicator of a damaged engine.\u003cbr\u003e-Lowers hydrocarbon emissions \u003cbr\u003e-Capacity: 6 fluid ounces \u003cbr\u003e-Height (without fittings): 5 inches \u003cbr\u003e-Outside Diameter: 2.45 inches\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003eFR-S \/ BRZ \/ 86 MOUNTING LOCATION\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eRadium engineers have strategically located the catch cans for compatibility with both\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eRight Hand Drive (RHD)\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eLeft Hand Drive (LHD)\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\"86\" model variations. Some brake clearancing is necessary on RHD installations. Both of these kits are also\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecompatible with all current aftermarket forced induction kits.\u003c\/strong\u003e For mounting, the kits use factory bosses and holes in the vehicle. No cutting, drilling or permanent modification to the vehicle is required.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eKIT DETAILS\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eThese two oil catch can kits are completely independent of each other and are sold individually or together. They do NOT vent to atmosphere (VTA), thus are emissions and track legal. Closed loop systems route clean filtered air back in through the engine to be burned and to promote negative crankcase pressure for optimal performance. Furthermore, closed systems prevent unwanted oil vapors into the cabin. Each kit includes: \u003cbr\u003e\u003cbr\u003e-Radium billet oil catch can with integrated condenser and dipstick\u003cbr\u003e-Radium laser cut powder coated \"86\" specific mounting bracket\u003cbr\u003e-Anodized aluminum banjo bolt, -8AN hose ends, and adapter fittings\u003cbr\u003e-Enough hose to mate to custom applications  \u003cbr\u003e-Stainless steel mounting hardware\u003cbr\u003e-Installation instructions\u003c\/p\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e20-0102 Crankcase Vent\u003c\/strong\u003e kit mounts on the left side of the engine bay. This catch can runs inline with the 1\/2\" breather port. At low loads it experiences atmospheric pressure, but when the engine is at high load (WOT), this hose will experience vacuum and would normally be drawing unwanted crankcase vapors, unspent fuel, and oil sludge into the air filter intake pipe. If the engine is turbocharged or supercharged and you are finding oil accumulation stuck in the intercooler, this catch can is a necessity as oil will lower the thermal efficiency properties of the heat exchange process. \u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/productDESC\/ft86_crank_kit_2.jpg\" alt=\"\"\u003e\u003cbr\u003eThe \u003cstrong\u003e20-0101 PCV Valve\u003c\/strong\u003e kit mounts on the right side of the engine bay. This catch can runs inline with the 3\/8\" PCV (positive crankcase ventilation) valve. When the intake manifold pressure is close to or greater than atmospheric pressure, the PCV \"check\" valve closes and, thus, this hose experiences no flow. Conversely, the PCV hose will experience \"metered\" vacuum when the engine is idling, steady state cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run. Note: Because the Radium catch cans are pressure sealed, they are great for boosted applications as well so connecting to the intake manifold is permitted.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/productDESC\/ft86_pcv_kit2.jpg\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eFor the ultimate in engine protection, Radium recommends the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e20-0103\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e Dual Catch Can Kit\u003c\/strong\u003e \u003c\/span\u003ewhich utilizes both the \u003cstrong\u003eCrankcase\u003c\/strong\u003e and \u003cstrong\u003ePCV\u003c\/strong\u003e catch can kits, as shown below.\u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/DualCatchCan.jpg?ts=084718\" alt=\"\" width=\"600\" height=\"400\"\u003e\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":17383766556762,"sku":"rad20-0901-FL","price":218.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/radium-engineering-radium-engineering-radium-fr-sbrz86-pcv-side-catch-can-kit-fluid-lock-rad20-0901-fl-panda-motorworks-9050147.jpg?v=1770921790"},{"product_id":"radium-engineering-8an-orb-plug","title":"Radium Engineering 8AN ORB Plug","description":"","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":17985490288730,"sku":"rad14-0150","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/radium-engineering-radium-engineering-8an-orb-plug-rad14-0150-panda-motorworks-2097475.jpg?v=1770921731"},{"product_id":"radium-engineering-8an-orb-to-6an-male-fitting","title":"Radium Engineering 8AN ORB to 6AN Male Fitting","description":"","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":17985493696602,"sku":"rad14-0151","price":9.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/radium-engineering-radium-engineering-8an-orb-to-6an-male-fitting-rad14-0151-panda-motorworks-1402613.jpg?v=1770921730"},{"product_id":"radium-pcv-baffle-plate-ford-ecoboost-duratec-mazda-mzr","title":"Radium Engineering PCV Baffle Plate, Ford EcoBoost, Duratec, Mazda MZR","description":"\u003cspan\u003eThe Radium Engineering PCV Baffle Plate mounts to the engine block and replaces the factory plastic PCV plate and valve. Compared to the OEM unit, the CNC machined aluminum Radium Engineering PCV plate features an extra baffle to prevent oil sludge from entering the intake system without restricting air flow. Furthermore, there are two 10AN ORB ports machined above both aluminum baffles\u003c\/span\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":31625792880730,"sku":"rad20-0327-02","price":113.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/radium-engineering-radium-engineering-pcv-baffle-plate-ford-ecoboost-duratec-mazda-mzr-rad20-0327-02-panda-motorworks-7097849.jpg?v=1770921611"},{"product_id":"radium-engineering-5-16in-sae-female-to-6an-male-low-profile-elbow","title":"Radium Engineering  5\/16in SAE Female to 6AN Male, Low Profile Elbow","description":"","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":31913180627034,"sku":"rad20-0600","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/radium-engineering-radium-engineering-516in-sae-female-to-6an-male-low-profile-elbow-rad20-0600-panda-motorworks-6569847.jpg?v=1770919973"},{"product_id":"radium-engineering-5-16in-sae-female-to-6an-male","title":"Radium Engineering 5\/16in SAE Female to 6AN Male","description":"","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":31913183182938,"sku":"rad20-0290","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/radium-engineering-radium-engineering-516in-sae-female-to-6an-male-rad20-0290-panda-motorworks-4180785.jpg?v=1770919972"},{"product_id":"radium-engineering-3-8in-sae-female-to-6an-male","title":"Radium Engineering 3\/8in SAE Female to 6AN Male","description":"","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":31913184591962,"sku":"rad20-0291","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/radium-engineering-radium-engineering-38in-sae-female-to-6an-male-rad20-0291-panda-motorworks-6122051.jpg?v=1770919972"},{"product_id":"radium-engineering-denso-fuel-level-sending-adapter","title":"Radium Engineering Denso Fuel Level Sending Adapter","description":"\u003cspan\u003eThis kit is designed to adapt a specific Denso fuel level sender (not included) that is found in many vehicles including: Mitsubishi EVO X, Scion FR-S, Subaru BRZ, Subaru WRX (15+), Toyota 86, etc. There are other vehicles not listed. Reference the physical fuel level sender first to verify.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTo install, simply place the Denso fuel level sender onto the adapter and slide downwards until the tab locks into place. There are multiple integrated holes permitting different float heights. Included are two M5x0.8x12mm stainless steel bolts.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe adapter is made from 6061 aluminum and anodized black. There is also a provision to secure an OEM fuel temperature sensor.\u003c\/span\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":32165740609626,"sku":"rad20-0350","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/radium-engineering-radium-engineering-denso-fuel-level-sending-adapter-rad20-0350-panda-motorworks-9254016.jpg?v=1770919850"},{"product_id":"radium-adjustable-pressure-switch","title":"Radium Adjustable Pressure Switch","description":"\u003cspan\u003eThis Adjustable Pressure Switch offers a solution for triggering staged fuel pump(s) based on positive boost pressure. This normally open (N.O.) switch features a 3-15psi adjustable set point to match any application. The stainless steel body features a 1\/8\" NPT male port. Connector and pins are included (assembly required). This switch ONLY activates with positive pressure.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eINSTALLATION NOTES:\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e-DO NOT route the main power for a fuel pump through this switch. Use the switch to trigger a relay.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e-This switch may be used to trigger any device, not just a fuel pump, as long as the current demand is less than 0.5 Amp.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e-Review the installation instructions in the above link prior to purchasing.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e-The switch DOES NOT come pre-set to any particular pressure, it MUST be calibrated using the method outlined in the installation instructions.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e-This switch may also be used in other fluid applications (oil, fuel, coolant, etc). DO NOT use with brake fluid.\u003c\/span\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":32165753225306,"sku":"rad20-0236","price":142.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/radium-engineering-radium-adjustable-pressure-switch-rad20-0236-panda-motorworks-1749887.jpg?v=1770919850"},{"product_id":"fuel-rail-mazda-20b-rew-secondary","title":"Fuel Rail, Mazda 20B-REW Secondary","description":"\u003cspan\u003eThe Radium Engineering high flow secondary fuel rail is for the OEM lower intake manifold found on the Mazda 20B-REW rotary engine. The aluminum fuel rail is anodized black for compatibility with all popular fuel types including E85. Manufactured with a large internal bore, the fuel rail can support all necessary engine power requirements. The three 8AN ORB ports are compatible with these fittings \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/8AN-ORB-Fittings-P479.aspx\"\u003eHERE\u003c\/a\u003e\u003cspan\u003e. The extra center port allows additional fuel system accessories such as the OEM fuel temperature sensor (using \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/8AN-ORB-Fittings-P479.aspx\"\u003e14-0421\u003c\/a\u003e\u003cspan\u003e shown below), a pressure transducer, \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Pulse-Damper-Direct-Mount-Kits-P759.aspx\"\u003eRadium fuel pulse damper\u003c\/a\u003e\u003cspan\u003e, etc.\u003c\/span\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":32242477105242,"sku":"rad20-0465","price":227.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/radium-engineering-fuel-rail-mazda-20b-rew-secondary-rad20-0465-panda-motorworks-1195477.jpg?v=1770919796"},{"product_id":"8an-orb-to-m12x1-5-female","title":"8AN ORB to M12x1.5 Female","description":"\u003cspan\u003eThese adapter fittings are designed to be used in many Radium products including fuel rails, surge tanks, fuel pressure regulators, etc. However, they can be used in any application using a -8AN ORB (3\/4\"-16) O-ring port.\u003c\/span\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":32242497552474,"sku":"rad14-0421","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/radium-engineering-8an-orb-to-m12x15-female-rad14-0421-panda-motorworks-8910302.jpg?v=1770919795"},{"product_id":"8an-orb-to-8-5mm-barb","title":"8AN ORB to 8.5mm Barb","description":"\u003cspan\u003eThese adapter fittings are designed to be used in many Radium products including fuel rails, surge tanks, fuel pressure regulators, etc. However, they can be used in any application using a -8AN ORB (3\/4\"-16) O-ring port.\u003c\/span\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":32242512887898,"sku":"rad14-0294","price":9.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/radium-engineering-8an-orb-to-85mm-barb-rad14-0294-panda-motorworks-3186566.jpg?v=1770919794"},{"product_id":"radium-engineering-fitting-6an-orb-to-5-16-barb","title":"Radium Engineering Fitting 6AN ORB to 5\/16 BARB","description":"\u003cspan\u003eThese anodized billet aluminum adapter fittings can be used in any application using a 9\/16\"-18 O-ring port. This is the same thread pitch used in -6AN (ORB=O-Ring Boss). They all feature FKM (Viton) O-rings for all oil and fuel types.\u003c\/span\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":32242589007962,"sku":"rad14-0291","price":9.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/radium-engineering-radium-engineering-fitting-6an-orb-to-516-barb-rad14-0291-panda-motorworks-1044595.jpg?v=1770919794"},{"product_id":"radium-engineering-3-8in-sae-female-to-6an-male-low-profile-elbow","title":"Radium Engineering  3\/8in SAE Female to 6AN Male, Low Profile Elbow","description":"\u003cspan data-mce-fragment=\"1\"\u003eThese adapter fittings are available in a variety of sizes. They push-on and secure to most modern USA, European, Japanese, etc. fuel injection systems and are used to convert an OEM SAE Quick Connect connection. \u003c\/span\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":36311007625378,"sku":"rad20-0601","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/radium-engineering-radium-engineering-38in-sae-female-to-6an-male-low-profile-elbow-rad20-0601-panda-motorworks-2404219.jpg?v=1770919644"},{"product_id":"radium-engineering-2017-honda-civic-type-r-port-injection-kit","title":"Radium Engineering 2017+ Honda Civic Type-R Port Injection Kit","description":"Offers a solution for adding more fueling capability to the Honda K20C1 engine. Installs between the intake manifold and the head. Fuel rail included.\u003cbr\u003e\u003cbr\u003eThis Part Fits:\u003cp\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2020\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eCivic\u003c\/td\u003e\n\u003ctd\u003eType R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":39737381519522,"sku":"RAD20-0428","price":284.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/radium-engineering-radium-engineering-2017-honda-civic-type-r-port-injection-kit-rad20-0428-panda-motorworks-3181267.jpg?v=1770919257"},{"product_id":"radium-engineering-13-ford-focus-st-16-focus-rs-coolant-tank-kit","title":"Radium Engineering 13+ Ford Focus ST\/ 16+ Focus RS Coolant Tank Kit","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe Radium Coolant Expansion Swirl Tank features three ports that use -6AN to 9\/16-18 O-ring adapters (not tapered pipe threads) for a positive seal. The main tank is a 2-piece design constructed of cast aluminum. The two halves (shown below) are welded together along with a CNC billet aluminum cap receiver which mates to any standard 32mm \"import\" style pressure cap. Coolant expansion tanks are necessary for proper air bleeding in applications that utilize a low mounted radiator, such as a V-Mount or a Rear-Mount, such as Michael Essa's championship winning BMW E46 shown below. The Radium Engineering tank also has an internal swirl feature, as shown below. Hot pressurized coolant from the cylinder head is sent into the vortex chamber's inlet tangentially and accelerated to a high rate of rotation. This is an old hot rod trick to help aid in deaerating the system. Included are three -6AN female 90 degree hose ends that screw onto the three -6AN male coolant tank port fittings. They are lightweight black anodized aluminum and are used for push-lok style 3\/8\" ID hose. All coolant tanks are pressure tested in house (shown below) and then powder coated texture black and laser etched. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e*Includes:* \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e* Cast Aluminum Coolant Tank \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e* Powder Coated Wrinkle Black \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e* -6AN O-Ring Adapter Fittings \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e* -6AN 90 degree Push-Lok Hose Ends \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e* Nickel Plated Sight Tube Fittings \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e* Billet Aluminum 32mm Pressure Cap Receiver \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e* Billet Aluminum Pressure Bleed 1\/4\" Nipple *Mounting:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e* A laser cut black powercoated laser cut mounting bracket is included.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e***Requires pressure cap available \u003ca href=\"https:\/\/www.pandamotorworks.com\/products\/radium-engineering-radiator-cap-type-a-1-5-bar-black\"\u003ehere.\u003c\/a\u003e ***\u003c\/strong\u003e\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":40493606928546,"sku":"rad20-0318","price":332.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/radium-engineering-radium-engineering-13-ford-focus-st-16-focus-rs-coolant-tank-kit-rad20-0318-panda-motorworks-7336466.png?v=1770918709"},{"product_id":"radium-engineering-radiator-cap-type-a-1-5-bar-black","title":"Radium Engineering Radiator Cap Type-A 1.5 Bar - Black","description":"\u003cp\u003e\u003cspan style=\"font-size: 1.4em;\"\u003eRadium Engineering Radiator Cap Type-A 1.5 Bar - Black\u003c\/span\u003e\u003c\/p\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr\u003e***Only works on \u003ca href=\"https:\/\/www.pandamotorworks.com\/products\/radium-engineering-13-ford-focus-st-16-focus-rs-coolant-tank-kit\"\u003eRadium coolant tank\u003c\/a\u003e when being used for the Focus RS or ST***\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":42634918134011,"sku":"rad18-0076-A15","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/radium-engineering-radium-engineering-radiator-cap-type-a-15-bar-black-rad18-0076-a15-panda-motorworks-162633.jpg?v=1739297937"},{"product_id":"radium-engineering-10an-orb-to-6an-male","title":"Radium Engineering 10AN ORB to 6AN Male","description":"","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":42657434632443,"sku":"rad14-0130","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/radium-engineering-radium-engineering-10an-orb-to-6an-male-rad14-0130-panda-motorworks-327668.jpg?v=1739297924"},{"product_id":"radium-engineering-10an-orb-to-barb-for-3-8in-hose","title":"Radium Engineering 10AN ORB to Barb for 3\/8in Hose","description":"","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":42657441480955,"sku":"rad14-0191","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/radium-engineering-radium-engineering-10an-orb-to-barb-for-38in-hose-rad14-0191-panda-motorworks-133587.jpg?v=1739297923"},{"product_id":"radium-engineering-oem-style-sae-quick-disconnect-fitting-5-16in-male-to-6an-male","title":"Radium Engineering OEM Style SAE Quick Disconnect Fitting 5\/16in Male to 6AN Male","description":"OEM Style SAE Quick Disconnect Fitting 5\/16in Male to 6AN Male","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":42958115471611,"sku":"rad14-0146","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/radium-engineering-radium-engineering-oem-style-sae-quick-disconnect-fitting-516in-male-to-6an-male-rad14-0146-panda-motorworks-240095.jpg?v=1739297894"},{"product_id":"radium-engineering-honda-civic-type-r-catch-can-kit-pcv-fluid-lock","title":"Radium Engineering Honda Civic Type-R Catch Can Kit PCV Fluid Lock","description":"Single catch can kit for the Honda Civic Type-R (FK8). Interfaces with the PCV hose. All fittings, hoses and hardware included for an easy bolt-in installation.  Includes Radium's Fluid Lock catch can (patent pending).\u003cbr\u003e\u003cbr\u003eThis Part Fits:\u003cp\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2020\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eCivic\u003c\/td\u003e\n\u003ctd\u003eType R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":43904698319099,"sku":"RAD20-0424-FL","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/radium-engineering-radium-engineering-honda-civic-type-r-catch-can-kit-pcv-fluid-lock-rad20-0424-fl-panda-motorworks-681243.jpg?v=1739297473"},{"product_id":"radium-engineering-catch-can-kit-ccv-civic-type-r-fluid-lock","title":"Radium Engineering Catch Can Kit CCV Civic Type-R Fluid Lock","description":"Single catch can kit for the Civic Type-R FK8. Interfaces with the crankcase vent hose. All fittings, hoses and brackets included for easy bolt-in installation.\u003cbr\u003e\u003cbr\u003eThis Part Fits:\u003cp\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2021\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eCivic\u003c\/td\u003e\n\u003ctd\u003eType R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":43904698351867,"sku":"RAD20-0825-FL","price":256.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/radium-engineering-radium-engineering-catch-can-kit-ccv-civic-type-r-fluid-lock-rad20-0425-fl-panda-motorworks-491460.jpg?v=1739297472"},{"product_id":"radium-engineering-dual-catch-can-kit-civic-type-r-fluid-lock","title":"Radium Engineering Dual Catch Can Kit Civic Type-R Fluid Lock","description":"Dual catch can kit for the Honda Civic Type-R FK8. Interfaces with both the crankcase vent line and PCV line. Includes all parts for easy bolt-in installation.\u003cbr\u003e\u003cbr\u003eThis Part Fits:\u003cp\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2021\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eCivic\u003c\/td\u003e\n\u003ctd\u003eType R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":43904698384635,"sku":"RAD20-0826-FL","price":446.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/radium-engineering-radium-engineering-dual-catch-can-kit-civic-type-r-fluid-lock-rad20-0426-fl-panda-motorworks-753872.jpg?v=1739297472"},{"product_id":"radium-engineering-air-oil-separator-universal-kit","title":"Radium Engineering Air Oil Separator - Universal Kit","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIMPORTANT INSTALLATION NOTES:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e-For the AOS-R to function properly, a return port on the engine must be available on the engine to the oil pan.\u003cbr data-mce-fragment=\"1\"\u003e-The AOS-R must be mounted high enough in the engine bay so that the port on the bottom is higher than the engine return port.\u003cbr data-mce-fragment=\"1\"\u003e-For heating purposes, engine coolant must be routed to the AOS-R to prevent condensation.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWithout a properly designed air oil separator, water condensation can develop and find its way in the oil pan contaminating engine oil.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis keeps the AOS-R warm and prevents internal water condensation. Because water is more dense than oil, there is an integrated water trap found around the bottom perimeter that prevents condensation from descending into the oil pan. With a properly operating system, the fluid level inside the AOS-R will be empty after sitting. If there is a possible return obstruction, simply unscrew the AOS-R dipstick for inspection. Conversely, the entire billet unit disassembles into 3 large pieces for servicing.\u003cbr\u003e\u003cimg height=\"400\" width=\"600\" alt=\"\" src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/Subaru_AOS-R_VTE_Diagram.png?ts=045300\"\u003e\u003cbr\u003eFor plumbing, the valve cover vent(s) are routed into the AOS-R inlet where stainless steel condensing material (shown below) separates the oil from the gasses.\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/VTA_CCC_Media.jpg?ts=061353\"\u003e\u003cbr\u003eThe filtered liquid oil is collected at the bottom of the AOS-R and drawn into the oil pan. Meanwhile, the clean crankcase air can either vent-to-atmosphere (VTA) or vent-to-engine (VTE). Shown above is a plumbing example for the 20-0219 AOS-R, Universal VTE. All of the plumbing in the example above also applies to the 20-0819 AOS-R, Universal, VTA except for the yellow hose. This line is not required as the VTA unit vents-to-atmosphere through the top of the can.\u003cstrong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eBenefits\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e-Lowers hydrocarbon emissions\u003cbr\u003e-Effectively raises the octane and increases engine performance with cleaner inlet air\u003cbr\u003e-Prevents oil buildup in the intake or intercooler system walls, throttle body, intake manifold, etc\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIncluded\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e-Machined alumium Radium Engineering AOS-R\u003cbr\u003e-Aluminum mount that permits 360 degree rotation\u003cbr\u003e-Two 5\/16\" barbed fittings for coolant lines\u003cbr\u003e-Stainless steel hardware \u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePorts\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eInlet Port(s): 7\/8\"-14 threaded for 10AN ORB fittings\u003cbr\u003eOutlet Port (VTE only): 7\/8\"-14 threaded for 10AN ORB fittings\u003cbr\u003eReturn Port: 7\/8\"-14 threaded for 10AN ORB fittings\u003cbr\u003eCoolant Ports: 7\/16\"-20 threaded, includes two 7mm (or 5\/16\") barb fittings \u003cbr\u003eNOTE: \u003ca href=\"https:\/\/www.radiumauto.com\/10AN-ORB-Fittings-P297.aspx\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e for a list of fittings compatible with the 10AN ORB ports.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eMeasurements\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eAOS-R Height: 6.7\" (without fittings)\u003cbr\u003eAOS-R Diameter: 3.45\" Round\u003cbr\u003eAOS-R Capacity: 20.3 oz (600mL)\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e*If operated in freezing environments, Radium Engineering recommends installing insulation sleeving (not included) over any hose exposed to cold air flow. This will help prevent the natural phenomenon of water condensation freezing and potentially clogging the hose. \u003cbr\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003e\u003cstrong\u003e20-0219 AOS-R, Universal, VTE\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe vent-to-engine air-oil separator has a top (inlet) and side (outlet) port. The outlet port should be routed back into the intake or turbo inlet pipe. The VTE system is a must for mass-air flow (MAF) sensor engines. Furthermore, the VTE AOS-R will not expel an undesireable gas scent into the cabin. Lastly, the VTE system will prevent any potential oil debris from coating the engine bay.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":44343295312123,"sku":"rad20-0219","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/radium-engineering-radium-engineering-air-oil-separator-universal-kit-rad20-0219-panda-motorworks-337456.jpg?v=1739297315"},{"product_id":"radium-engineering-universal-10an-orb-plug","title":"Radium Engineering Universal 10AN Orb Plug","description":"\u003cspan\u003eRadium Fittings are a just a few of the optional fittings for both inlets and outlets of the catch cans, manifolds or any other project you have. \u003c\/span\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":44518892896507,"sku":"rad14-0351","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/products\/radium-engineering-radium-engineering-universal-10an-orb-plug-rad14-0351-panda-motorworks-792505.jpg?v=1739297250"},{"product_id":"radium-engineering-fuel-surge-tank-install-kit-focus-ecoboost","title":"Radium Engineering Fuel Surge Tank Install Kit, Focus EcoBoost","description":"\u003cp\u003eThis comprehensive installation kit includes everything needed to install a Radium fuel surge tank (FSTR-RA) in a 2013+ Focus ST and 2015+ Focus RS. More FST information can be found\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/FSTR-RA-Fuel-Surge-Tank-Regulated-P2768.aspx\"\u003eHERE\u003c\/a\u003e. Here is a informative video on how a Radium Fuel Surge Tank (FST) works:\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"350\" width=\"425\" src=\"https:\/\/www.youtube.com\/embed\/ACEriGn0PKw\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr\u003eThe fuel pump inside the surge tank is used to replace and mimic the OEM fuel supply line and feed the OEM HPFP. The pump is protected from fuel starvation as the OEM low pressure fuel pump(s) are redirected to supply fuel to the FST. Overflow fuel returns back into the OEM fuel filler hose with an included billet adapter.\u003cbr\u003e\u003cimg alt=\"\" src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/Focus_FST_Plumbing_OEM.png\"\u003e\u003cbr\u003eThe integrated regulator on the FSTR-RA can be vacuum referenced if 1:1 fuel pressure is required or ran static to mimic the stock system.\u003cbr\u003e\u003cbr\u003eThe MK3 Ford Focus install kit locates the FSTR-RA in a collision-safe area under the vehicle, in front of the rear bumper support. The anodized aluminum bracket solidly mounts to OEM mounting points. Heat tape is included to reflect unwanted heat from the exhaust system, as shown.\u003cbr\u003e\u003cimg height=\"400\" width=\"600\" alt=\"\" src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/prod_pic-3434.jpg\"\u003e\u003cbr\u003eAlso included are wiring components with flying leads featuring Raychem solderless butt splices, and a weatherproof fuse and relay to drive the FSTR-RA fuel pump. Wiring is very simple and takes less than 30 minutes to assemble. No soldering is required.\u003cimg height=\"400\" width=\"600\" alt=\"\" src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/Focus_FST_Wiring_Diagram.png\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is Included?\u003c\/strong\u003e\u003cbr\u003e-Aluminum MK3 Focus FST Mounting Bracket\u003cbr\u003e-Aluminum Push Lok -6AN Hose Ends\u003cbr\u003e-AN and OEM Style Adapter Fittings\u003cbr\u003e-Vapor Shield 3\/8\" (-6AN) EFI Hose\u003cbr\u003e-Wiring Components with Relay and Fuse\u003cbr\u003e-Stainless Steel Hardware\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat is Required?\u003c\/strong\u003e\u003cbr\u003e1. A \u003ca href=\"http:\/\/www.radiumauto.com\/FSTR-RA-Fuel-Surge-Tank-Regulated-P2768.aspx\"\u003eFSTR-RA (Fuel Surge Tank-Regulated)\u003c\/a\u003e is needed to go with this installation kit. See the options above.\u003cbr\u003e2. A means for adjusting the FSTR-RA fuel pressure is needed. This can come from special OBDII software such as a COBB Access Port. Alternatively, Radium 20-0152 (see option above) can be installed on the FSTR-RA outlet port.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":45140544782587,"sku":"rad20-0365","price":427.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/files\/radium-engineering-radium-engineering-fuel-surge-tank-install-kit-focus-ecoboost-rad20-0365-panda-motorworks-569866.jpg?v=1739296657"},{"product_id":"radium-engineering-fuel-pressure-regulator-damper-fprd-ra-black","title":"Radium Engineering Fuel Pressure Regulator Damper (FPRD-RA) - Black","description":"\u003cspan data-mce-fragment=\"1\"\u003eA high flow fuel pressure regulator with a built-in fuel pulse damper. Regulator is ideal for pumps that flow from 100 to 1,400 liters per hour. Universal application. E85 compatible. \u003c\/span\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":45186711617787,"sku":"rad20-1528-00","price":284.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/files\/radium-engineering-radium-engineering-fuel-pressure-regulator-damper-fprd-ra-black-rad20-1528-00-panda-motorworks-464605.jpg?v=1739296613"},{"product_id":"radium-engineering-0-100-psi-fuel-pressure-gauge","title":"Radium Engineering 0-100 PSI Fuel Pressure Gauge","description":"\u003cspan data-mce-fragment=\"1\"\u003eThis high-accuracy fuel pressure gauge is suitable for all fueling applications. It features an acrylic lens with a silicone filled dial that reads from 0 to 100psi (0 to 6.9 BAR) with +\/- 2% accuracy. \u003cbr\u003e\u003cbr\u003eSilicone fluid prevents the needle from vibrating for easy pressure readings. The internal bubble is normal. \u003cbr\u003e\u003cbr\u003eRugged stainless 1-5\/8\" OD steel case (1-3\/4\" OD bezel) with nickel plated male 1\/8\" NPT fitting. \u003cbr\u003e\u003cbr\u003eAvailable with black bezel and housing only. \u003c\/span\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":45186712994043,"sku":"rad20-0029","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/files\/radium-engineering-radium-engineering-0-100-psi-fuel-pressure-gauge-rad20-0029-panda-motorworks-355529.jpg?v=1739296613"},{"product_id":"radium-engineering-10an-male-to-10an-orb-fitting-black","title":"Radium Engineering 10AN Male to 10AN ORB Fitting - Black","description":"\u003cspan data-mce-fragment=\"1\"\u003eRadium Fittings are a just a few of the optional fittings for both inlets and outlets of the catch cans, manifolds or any other project you have. \u003c\/span\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":45186716762363,"sku":"rad14-0132","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/files\/radium-engineering-radium-engineering-10an-male-to-10an-orb-fitting-black-rad14-0132-panda-motorworks-624686.jpg?v=1739296613"},{"product_id":"radium-engineering-6an-male-to-1-4npt-male-90deg","title":"Radium Engineering 6AN Male to 1\/4NPT Male 90DEG","description":"\u003cspan data-mce-fragment=\"1\"\u003eRadium Fittings are just a few of the optional fittings for both inlets and outlets of the catch cans, manifolds, or any other project you have. \u003c\/span\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":45186834956539,"sku":"rad14-0270","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/files\/radium-engineering-radium-engineering-6an-male-to-14npt-male-90deg-rad14-0270-panda-motorworks-394395.jpg?v=1739296612"},{"product_id":"radium-engineering-multi-port-regulator-rotating-assembly-mpr-ra-black","title":"Radium Engineering Multi-Port Regulator Rotating Assembly (MPR-RA) - Black","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Multi-Port Regulator-Rotating Assembly (MPR-RA) is a great solution for both simple and complex high-flow fuel systems. Its unique port configuration makes it ideal for combining dual fuel pumps into a single feed line. Conversely, it can be used to split a single feed line to a dual bank fuel system with 2 fuel rails. In additon, it can also be used for single pump or single fuel rail applications by simply plugging the unused ports. \u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMOUNTING\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThere are many unique ways to mount this regulator. For example, wall mounting can be accomplished by using the M6 holes that pass through the regulator body or the included mounting bracket (shown below) can be used for floor mounting. M6x1mm hardware is provided.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-1100-00_A.jpg?ts=051120\" alt=\"\" width=\"600\" height=\"400\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-1100-00_A.jpg?ts=051120\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003chr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePLUMBING\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis regulator can be plumbed many different ways to suit various installations, such as traditional flow-through or dead-head systems. Because of this flexibility, it eliminates the need for an extra \"Y\" fitting. The lower 2 opposing return ports are unique in that they flow parallel with the pressure ports eliminating the need for elbow fittings. Either lower port can be used for the return line. Plug(s) are provided for unused ports. \u003c\/span\u003e\u003chr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFUEL PRESSURE ADJUSTMENT\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eRA-series regulators feature the first tool-less pressure adjustment. A jam nut and set screw are no longer required. With a simple turn of the knob, pressure will be increased or decreased. \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/Rotating_Assembly-2.jpg?ts=115646\" alt=\"\" width=\"600\" height=\"400\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/Rotating_Assembly-2.jpg?ts=115646\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTo aid in adjusting pressure, there are incremental detents that provide haptic feedback to the user. Every detent permits 1psi (+\/-0.5psi) of adjustment depending on current fuel pressure.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003chr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFUEL PRESSURE STABILITY\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWith years of track and bench testing data, the RA-series regulators have been refined to optimize pressure management. A newly designed single stainless steel return orifice generates laminar flow that enhances stability control.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMinimum Pressure: 18.5psi (1.3bar)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMaximum Pressure: *N\/A\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e*This is rhetorical. The maximum pressure is dependent on the relief valve inside the pump or the maximum current the fuel pump controller allows. \u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003chr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1:1 RISING RATE VACUUM REFERENCE\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eRA-series regulators feature a 360 degree swiveling vacuum reference port that is double O-ring sealed. This is the first in the industry. It permits the installer to quickly point the vacuum fitting in any direction with no tools required.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThere are 4 interchangeable 10-32 threaded vacuum port fittings provided to cover all scenarios. \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/Vacuum_Reference_Fittings.png?ts=113526\" alt=\"\" width=\"600\" height=\"400\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/Vacuum_Reference_Fittings.png?ts=113526\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e1. \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eBarbed Fitting\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e: A black zinc-plated 3\/16\" (5mm) barb machined from high strength steel that is compatible with the following vacuum hoses: 5\/32\" (4mm), 3\/16\" (5mm), and 7\/32\" (6mm).\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2. \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e3AN Male Fitting\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e: A black zinc-plated adapter machined from high strength steel that is compatible with 3AN hose ends.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e3. \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ePush-To-Connect\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e: A nickel-plated brass fitting with Buna-N O-rings that is compatible with hard plastic 1\/4\" OD tubing.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e4. \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eVacuum Plug\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e: A black oxide stainless steel screw that is used to maintain a constant (non dynamic) fuel pressure. Beginning in the mid 1990s, vehicle manufacturers started transitioning to returnless fuel systems to lower EVAP emissions. To keep temperatures lower, these regulators are mounted inside the tank and do NOT have the ability to be vacuum referenced. This plug would be required in this scenario.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eNOTE: When installing the vacuum fitting, it is recommended to use a wicking medium-strength threadlocker.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/em\u003e\u003chr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFUEL COMPATIBILITY\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAll RA-series regulators are suitable with all gasoline types including unleaded, leaded, oxygenated, and pre-mixes. Furthermore, they are compatible with alcohol blends of fuel including methanol, ethanol, and E85. \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003chr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eINCLUDED\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e-Main Rotating Assembly\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-Mounting Bracket with Hardware\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-5mm Barbed Vacuum Fitting\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-Vacuum Plug Fitting (Returnless)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-1\/4\" Push-To-Connect Vacuum Fitting\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-3AN Male Vacuum Fitting\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-6AN ORB plug (x2)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-8AN ORB plug (x1)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-6AN ORB to 6AN male adapter (x3)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-8AN ORB to 8AN male adapter (x1)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-1100-00.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-1100-00.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003chr data-mce-fragment=\"1\"\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":45186993422587,"sku":"rad20-1100-00","price":199.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/files\/radium-engineering-radium-engineering-multi-port-regulator-rotating-assembly-mpr-ra-black-rad20-1100-00-panda-motorworks-259939.jpg?v=1739296612"},{"product_id":"radium-6an-orb-to-313in-sae-male-fitting","title":"Radium 6AN ORB to .313in SAE Male Fitting","description":"\u003cspan data-mce-fragment=\"1\"\u003eAnodized aluminum adapter fitting. 5\/16 SAE Male to 6AN ORB. \u003c\/span\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":45186999648507,"sku":"rad14-0646","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/files\/radium-engineering-radium-6an-orb-to-313in-sae-male-fitting-rad14-0646-panda-motorworks-525947.jpg?v=1739296612"},{"product_id":"radium-engineering-6an-inline-to-1-8npt-female-fitting","title":"Radium Engineering 6AN Inline to 1\/8NPT Female Fitting","description":"\u003cspan data-mce-fragment=\"1\"\u003e6AN tee fitting adapter; -AN Male to -AN Female with 1\/8\" female NPT Female threads; Commonly used to install a sensor or gauge inline with a -AN hose \u003c\/span\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":45187015409915,"sku":"rad14-0148-06","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/files\/radium-engineering-radium-engineering-6an-inline-to-18npt-female-fitting-rad14-0148-06-panda-motorworks-723735.jpg?v=1739296612"},{"product_id":"radium-engineering-00-05-honda-s2000-lhd-only-catch-can-kit-crankcase-fluid-lock","title":"Radium Engineering 00-05 Honda S2000 LHD Only Catch Can Kit Crankcase Fluid Lock","description":"\u003cp\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003e20-0092 CCV Catch Can Kit\u003c\/strong\u003e\u003cspan\u003e (shown below) runs inline with the 1\/2\" valve cover breather port and air intake pipe. At low loads it experiences atmospheric pressure, but when the engine is at high load (WOT), this hose will experience vacuum and would normally be drawing unwanted crankcase vapors, unspent fuel, and oil sludge into the air filter intake pipe. If the engine is turbocharged or supercharged a catch can will help keep oil out of the charge piping. This kit is compatible with all strut tower braces.\u003c\/span\u003e\u003cbr\u003e\u003cimg height=\"400\" width=\"600\" alt=\"\" src=\"https:\/\/www.radiumauto.com\/Assets\/ProductDESC\/s2000ccv1.jpg\"\u003e\u003cbr\u003e\u003cimg height=\"400\" width=\"600\" alt=\"\" src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0092-FL.jpg?ts=061430\"\u003e\u003cbr\u003e\u003cstrong\u003eCCV Catch Can Kit Includes\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e-Radium billet oil catch can with integrated condenser and dipstick\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e-Radium laser cut anodized S2000 specific mounting bracket\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e-Anodized aluminum -8AN hose ends and adapter fittings\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e-Enough 1\/2\" PCV rubber hose to mate to custom applications \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e-Vacuum and heater hose to eliminate OEM metal hard tube loom \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e-Stainless steel mounting hardware \u003c\/span\u003e\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":46884449583355,"sku":"rad20-0092-FL","price":218.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/files\/radium-engineering-radium-engineering-00-05-honda-s2000-lhd-only-catch-can-kit-crankcase-fluid-lock-rad20-0092-fl-panda-motorworks-965171.jpg?v=1739296164"},{"product_id":"radium-engineering-10an-straight-pushlok-hose-end","title":"Radium Engineering 10AN Straight Pushlok Hose End","description":"\u003cp\u003e\u003cspan\u003eReuseable black aluminum PushLok hose ends. Can be used with Radium PCV\/Fuel hose.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\u003cbr\u003e-Hose clamps are NOT required with PushLok hose ends.\u003cbr\u003e-Install by lubricating the barbs and pushing into the hose.\u003cbr\u003e-The hose assembly is capable of withstanding more than 800psi pressure.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":46891089625339,"sku":"rad14-0211","price":9.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/files\/radium-engineering-radium-engineering-10an-straight-pushlok-hose-end-rad14-0211-panda-motorworks-235859.jpg?v=1739296163"},{"product_id":"radium-engineering-single-universal-catch-can-kit-fluid-lock","title":"Radium Engineering Single Universal Catch Can Kit - Fluid Lock","description":"\u003cp\u003e\u003cstrong\u003eCATCH CAN OVERVIEW\u003cbr\u003e\u003c\/strong\u003eWhen properly designed, an oil catch can will prevent sludge buildup in the intake, intercooler, throttle body, etc. They effectively raise fuel octane and increase engine performance with cleaner inlet air. Also, excessive oil collection can be an indicator of a damaged engine. Furthermore, they lower hydrocarbon emissions.\u003cbr\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/FL3-Full.jpg?ts=045709\" alt=\"\" width=\"600\" height=\"400\"\u003e\u003cbr\u003eNOTES:\u003cbr\u003e1. Depending on the PCV system design, some engines may require multiple catch cans.\u003cbr\u003e2. Catch cans are NOT designed to be used with aftermarket crankcase vacuum pumps. \u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eRADIUM CATCH CAN FEATURES\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003eThese catch cans are used in Radium Engineering application-specific catch can kits. They are machined from solid 6061 aluminum. The 2 halves and all ports are O-ring sealed, thus safe for pressurized (forced induction) applications. The main inlet and outlet ports are 10AN ORB (7\/8\"-14) female threads. The integrated M8x1.25mm threaded dipstick (shown below) unscrews for a quick way to check oil level.\u003cbr\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/StainlessDipstick.jpg\" alt=\"\"\u003e\u003cbr\u003eThese catch cans feature advanced air\/oil separation. As shown below, there is an integrated stainless steel baffle plate.\u003cbr\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/FL3-Explode.jpg?ts=044739\" alt=\"\" width=\"600\" height=\"400\"\u003e\u003cbr\u003eThis is a secondary baffle that prevents contaminants from exiting the catch can. Additionally, there are 2 internal stainless steel air\/oil separators. One on the inlet and one on the outlet. These are easily washable and can be reused.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eRADIUM CATCH CAN SERVICING\u003c\/strong\u003e\u003cbr\u003eThese catch cans feature Radium Engineering's patent pending Fluid Lock® technology. If the catch can fills up and is not emptied, an internal valve closes and eliminates the contaminants from exiting the catch can and entering the engine. Furthermore, it maintains normal venting through the catch can prohibiting engine damage.\u003cbr\u003e\u003cbr\u003eFor draining, there are a couple options depending on the application. If there is space, the lower half of the body that holds all of the contaminants simply unscrews. However, if there is no room to remove the lower half of the catch can, there is a 4AN ORB (7\/16\"-20) female threaded drain port. A 4AN ORB plug (shown below) is provided.\u003cbr\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/CatchCanDrain.jpg\" alt=\"\"\u003e\u003cbr\u003eFor remote draining, consider this petcock drain kit \u003ca href=\"https:\/\/www.radiumauto.com\/Catch-Can-Petcock-Drain-Kit-P367.aspx\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eCATCH CAN DIMENSIONS\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e-Capacity: 7 fluid ounces\u003cbr\u003e-Height (without fittings): 4.9 inches\u003cbr\u003e-Outside Diameter: 2.45 inches\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003e1. Catch cans are sold without fittings. Compatible 10AN ORB adapter fittings\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":46891100406011,"sku":"rad20-0008-FL","price":169.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/5893\/files\/radium-engineering-radium-engineering-single-universal-catch-can-kit-fluid-lock-rad20-0008-fl-panda-motorworks-800877.jpg?v=1739296163"}],"url":"https:\/\/www.pandamotorworks.com\/collections\/radium-engineering-1.oembed?page=2","provider":"Panda Motorworks","version":"1.0","type":"link"}