Looking to add direct port water/meth injection to your Focus ST/RS? Look no further than the Panda Motorworks Direct Port Water/Meth Injection Kit...
View full details
Unlock 50-80HP on your boosted vehicle while decreasing your air temps by up to 150 degrees! The all new Snow Performance Stage 2 Boost Cooler® wat...
View full details
Sale
This kit is for the 2016+ Ford Focus RS. It is designed to replace the OEM fuel filter which is plumbed between the electric and mechanical fuel pu...
View full details
INSTALL INSTRUCTIONS This comprehensive installation kit includes everything needed to install a Radium fuel surge tank (FSTR-RA) in a 2013+ Focu...
View full details
Save 10%
If cars like yours typically suffer issues such as backfiring and stalling when using a fixed-ratio atmosphere-venting BOV, the Respons can hel...
View full details
Save 29%
Quality You Can See - Flow Rates You Can Trust If you are looking for a water methanol injection nozzle look no further. ProMeth offers the highest...
View full details
These anodized billet aluminum adapter fittings can be used in any application using a 9/16"-18 O-ring port. This is the same thread pitch used in ...
View full details
Keep those boost temps down with the Boost Cooler! The Snow Performance Stage 2 Boost Cooler water-methanol injection kit is available for all fo...
View full details
The Radium Engineering high flow secondary fuel rail is for the OEM lower intake manifold found on the Mazda 20B-REW rotary engine. The aluminum fu...
View full details
These adapter fittings are designed to be used in many Radium products including fuel rails, surge tanks, fuel pressure regulators, etc. However, t...
View full details
These adapter fittings are designed to be used in many Radium products including fuel rails, surge tanks, fuel pressure regulators, etc. However, t...
View full details
Save 18%
Open up the flow of the charged air in your 2013+ Ford Focus ST with the Mishimoto hot-side intercooler pipe. The stock hot-side pipe in your Focus...
View full details
Save 18%
PRODUCT FEATURES Direct fit for the 2016–2018 Ford Focus RS Silicone construction absorbs the stresses of excessive engine movement Improves heat ...
View full details
Save 18%
PRODUCT FEATURES Direct fit for the 2016–2018 Ford Focus RS Silicone boots absorb the stresses of excessive engine movement Designed to not block ...
View full details
Sold out
ALL THE PERFORMANCE WITH OR WITHOUT THE NOISE! , GFB?s Mach 2 utilises GFB?s proven TMS Technology to ensure rapid boost recovery on gearshift and ...
View full details
Save 18%
Direct fit for the 2016–2018 Ford Focus RS 80% increase in core size 36% increase in internal core volume and 214% increase in external fin surfac...
View full details
Save 10%
AEM's 340lph E85-Compatible High Flow In-Tank Fuel Pumps feature robust internal construction that is designed to withstand the low lubricity cha...
View full details
Save 5%
The opening and closing of fuel injectors creates pressure pulses in the fuel rail which can lead to unstable fuel pressure. In order to achieve a ...
View full details
This kit is designed for use in the USDM 2008-2019 Subaru WRX STi (EJ257 only) and replaces the OEM fuel pressure regulator and damper assembly, sh...
View full details
This kit is designed to adapt a specific Denso fuel level sender (not included) that is found in many vehicles including: Mitsubishi EVO X, Scion F...
View full details
Save 10%
AEM's V2 Water/Methanol Injection Kits For Forced Induction Engines are a proven means for effectively reducing engine inlet air temperatures and s...
View full details
Save 5%
DescriptionThe Multi-Port Regulator-Rotating Assembly (MPR-RA) is a great solution for both simple and complex high-flow fuel systems. Its unique p...
View full details
Save 5%
This high-accuracy fuel pressure gauge is suitable for all fueling applications. It features an acrylic lens with a silicone filled dial that reads...
View full details
Save 5%
A high flow fuel pressure regulator with a built-in fuel pulse damper. Regulator is ideal for pumps that flow from 100 to 1,400 liters per hour. Un...
View full details
Save 5%
This comprehensive installation kit includes everything needed to install a Radium fuel surge tank (FSTR-RA) in a 2013+ Focus ST and 2015+ Focus RS...
View full details
This turbo inlet is the perfect addition to your aFe air intake system. It removes restriction of the factory turbo inlet and guarantees increased ...
View full details
This oversized 2-1/4in OD Turbo Muffler Delete replaces the factory turbo muffler located between the turbo compressor outlet and the hot side char...
View full details
This oversized 2-1/4in OD Turbo Muffler Delete replaces the factory turbo muffler located between the turbo compressor outlet and the hot side char...
View full details
Smooth transitions in the mandrel-bent aluminum tubing decrease turbulence and minimize pressure loss, increasing horsepower and torque. The BladeR...
View full details
Sold out
Smooth transitions in the mandrel-bent aluminum tubing decrease turbulence and minimize pressure loss, increasing horsepower and torque. The BladeR...
View full details
Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in...
View full details
Reinforced Silicone: These coupler hoses feature 5-PLY reinforced high temperature material which meet or exceed SAEJ20 Standard. Coupler Hoses: Al...
View full details
aFe Pro GUARD HD Oil Filter (4 Pack)This Part Fits: Year Make Model Submodel 2015-2020 Audi A3 Premium 2015-2020 Audi A3 Premium Plus 2015-2...
View full details
Sold out
aFe 15-20 Audi A3 17-20 A4 18-21 A5 16-21 A6 Pro GUARD Oil FilterThis Part Fits: Year Make Model Submodel 2015-2020 Audi A3 Premium 2015-2020 ...
View full details
